Technical data

Section 13 TECHNICAL DATA
Sub-Section 01 (SP AND SPI MODELS)
13-01-3
PROPULSION SP (5876) SPI (5878)
Propulsion system Bombardier Formula Pump
Jet pump type Axial flow single stage
Impeller rotation (seen from rear) Counterclockwise
Transmission Direct drive
Coupling type Crown splines
Oil type SEA-DOO JET PUMP SYNTHETIC
POLYOLESTER OIL 75W90 GL5
Steering nozzle pivoting angle 26°
Trim nozzle pivoting angle Not applicable
Minimum required water level 90 cm (35 in)
Drive shaft deflection (maximum) 0.5 mm (.020 in)
Impeller outside diameter 139.5 mm (5.490 in)
Impellerþ/þwear New 0.18 - 0.44 mm (.007 - .017 in)
ring clearance Wear limit 1.02 mm (.040 in)
Impeller shaft end play (new) 0.12 - 0.54 mm (.005 - .021 in)
Impeller shaft side play 0.05 mm (.002 in)
Impeller pitchþ/þmaterial 18.8° /
aluminum
Progressive pitch 11°-
26° / stainless steel
ADDITIONAL INFORMATION :þDo not mix different brands or oil types.
DIMENSIONS SP (5876) SPI (5878)
Number of passenger (driver incl.) 2
Overall length 254 cm (100 in)
Overall width 105 cm (41.3 in)
Overall height 92 cm (36.2 in)
Dry weight 176 kg (388 lb) 178 kg (392 lb)
Load limit (passenger and 10 kg (22 lb) luggage) 160 kg (352 lb)
ADDITIONAL INFORMATION :
CAPACITIES SP (5876) SPI (5878)
Fuel tank 34 L (9 U.S. gal)
Impeller shaft reservoir Capacity 90 mL (3 U.S. oz)
Oil level height To bottom of cover hole
Oil injection reservoir 4.5 L (1.2 U.S. gal)
ADDITIONAL INFORMATION :
www.SeaDooManuals.net