Technical data

ManualsBrandsSeaDoo ManualsMarineSP

291

292

293

294

295

296

297

298

299

300

Section 13 TECHNICAL DATA

Sub-Section 01 (SP AND SPI MODELS)

13-01-5

TIGHTENING TORQUES SP (5876) SPI (5878)

Exhaust manifold screw 24 N•m (17 lbf•ft) (4)

Magneto flywheel nut 145 N•m (107 lbf•ft) (1)

Flywheel (PTO side) 110 N•m (81 lbf•ft) (5)

Crankcase screws M8 24 N•m (17 lbf•ft) (3) (4)

M10 40 N•m (30 lbf•ft) (3) (4)

Crankcase / engine support nuts 35 N•m (26 lbf•ft) (1)

Engine support / hull 25 N•m (18 lbf•ft) (1)

Cylinder head screws 24 N•m (17 lbf•ft) (4)

Crankcase / cylinder screws 24 N•m (17 lbf•ft) (4)

Tuned pipe nut 25 N•m (18 lbf•ft) (1)

Tuned pipe fixation screws 25 N•m (18 lbf•ft) (1)

Cylinder head cover screws 9 N•m (80 lbf•in)

Flame arrester screws 10 N•m (88 lbf•in) (1)

Impeller 70 N•m (52 lbf•ft) (2)

Pump / hull nuts 35 N•m (26 lbf•ft) (1)

Venturi / pump housing screws 25 N•m (18 lbf•ft) (1)

Nozzle / venturi screws 20 N•m (15 lbf•ft) (1)

Pump housing cover screws 4 N•m (35 lbf•in) (1)

Inlet grate screws 8 N•m (71 lbf•in) (1)

Ride shoe screws 10 N•m (88 lbf•in) (1)

Cable retaining block bolts 6 N•m (53 lbf•in)

Steering cableþ/þstem arm bolt 3 N•m (26 lbf•in)

Steering stem arm bolts 6 N•m (53 lbf•in)

Handlebar clamp bolts 26 N•m (19 lbf•ft)

Ball joint bolt 7 N•m (62 lbf•in)

Front support bolts 15 N•m (11 lbf•ft) (1)

Rear supportþ/þcable bracket bolts 15 N•m (11 lbf•ft) (1)

Magneto housing cover screws 9 N•m (80 lbf•in) (5)

Starter mounting screws 22 N•m (16 lbf•ft) (1)

Starter lock nuts 7 N•m (62 lbf•in)

Spark plugs 24 N•m (17 lbf•ft) (5)

ADDITIONAL INFORMATION : Apply where indicated ; (1) Loctite 242 (blue)

(2) Loctite 271 (red)

(3) Loctite 515

(4) Synthetic grease

(5) Anti-seize lubricant

;

WARNING : Correct torques and use of Loctite must be strictly followed.