Technical data

Section 13 TECHNICAL DATA
Sub-Section 02 (SPX AND XP MODELS)
13-02-2
ELECTRICAL SPX (5877) XP (5858 / 5859)
Magneto generator output 160 W @ 6000 RPM
or 4.0 A @ 2000 RPM
180 W @ 6000 RPM
or 5.0 A @ 2000 RPM
Ignition system type CDI DC-CDI
Spark plug Make and type NGK BR8ES
Gap 0.5 - 0.6 mm (.020 - .024 in)
Ignition timing mm (in) 2.59 (.102) 3.38 (.133)
(BTDC) Degrees 20° ± 1 ➀ 22° ± 1 @ 3500 RPM
Generating coil 40 - 76 Ω Not applicable
Battery charging coil 0.05 - 0.6 Ω 0.1 - 1 Ω
Trigger coil Not applicable 190 - 300 Ω
Ignition coil Primary Not applicable 0.33 - 0.62 Ω
Secondary 9 - 15 kΩ
Engine rev limiter setting 7000 (± 50) RPM 7200 (± 50) RPM
Battery (Yuasa / Exide) 12 V, 19 A•h
Fuse Starting system 5 A
Charging system 15 A 15 A (2)
VTS system 7.5 A
Holder relay Not applicable 5 A
ADDITIONAL INFORMATION : ➀ Engine cold @ 6000 RPM.
CARBURETION SPX (5877) XP (5858 / 5859)
Carburetor Type Mikuni BN-38I (diaphragm) Mikuni BN-40I (diaphragm)
Quantity 2
Main jet 130 142.5
Pilot jet 67.5 70
Adjustment Low-speed screw 1-1/4 turn ± 1/4 1 turn ± 1/4
High-speed screw 0
Idle speed (in water) 1500 RPM
Idle speed (out of water) 3000 RPM
Fuel Type Regular unleaded gasoline
Minimum octane no. 87
Fuel return line orifice MAG 0.8 mm (.031 in)
PTO 0.8 mm (.031 in)
ADDITIONAL INFORMATION :
COOLING SPX (5877) XP (5858 / 5859)
Type Open circuit – Direct flow from jet propulsion unit
Thermostat None
Monitoring beeper setting 96-99°C (205-210°F)
ADDITIONAL INFORMATION :
www.SeaDooManuals.net