Technical data

ManualsBrandsSeaDoo ManualsMarineSP

301

302

303

304

305

306

307

308

309

310

Section 13 TECHNICAL DATA

Sub-Section 03 (GTS AND GTI MODELS)

13-03-5

TIGHTENING TORQUES

GTS (5817) GTI (5865 / 5866)

ENGINE

Exhaust manifold screws 24 N•m (17 lbf•ft) (4)

Magneto flywheel nut 145 N•m (107 lbf•ft) (1)

Flywheel (PTO side) 110 N•m (81 lbf•ft) (5)

Crankcase screws M8 24 N•m (17 lbf•ft) (3)* (4)

M10 40 N•m (30 lbf•ft) (3)* (4)

Crankcase / engine support nuts 35 N•m (26 lbf•ft) (1)

Engine support / hull 25 N•m (18 lbf•ft) (1)

Cylinder head screws 24 N•m (17 lbf•ft) (1)* (4)

Cylinder head cover screws (GTS) 9 N•m (80 lbf•in)

Crankcase / cylinder screws 24 N•m (17 lbf•ft) (1)** (4)

Tuned pipe nut 25 N•m (18 lbf•ft) (1)

Tuned pipe fixation screws 25 N•m (18 lbf•ft) (1)

Flame arrester screws 10 N•m (88 lbf•in)(1)

PUMP

Impeller 70 N•m (52 lbf•ft) (2)

Pump / hull nuts 35 N•m (26 lbf•ft) (1)

Venturi / pump housing screws 21 N•m (16 lbf•ft) (1)

Nozzle / venturi screws 20 N•m (15 lbf•ft) (1)

Pump housing cover screws 4 N•m (35 lbf•in)(1)

Inlet grate screws 8 N•m (71 lbf•in)(1)

Ride shoe screws 10 N•m (88 lbf•in)(1)

STEERING

Steering cable jam nuts 10 N•m (88 lbf•in)

Steering support / collar screws 15 N•m (11 lbf•ft) (1)

Steering stem screw 40 N•m (30 lbf•ft) (2)

Handlebar nuts 26 N•m (19 lbf•ft)

Reverse gate screws 20 N•m (15 lbf•ft) (1)

Steering / cable ball joint nut 7 N•m 62 lbf•in)

ELECTRICAL

Reverse cable ball joint nut 7 N•m 62 lbf•in)

Magneto housing cover screws 9 N•m (80 lbf•in)(5)

Starter mounting screws 22 N•m (16 lbf•ft) (1)

Starter lock nuts 7 N•m (62 lbf•in)

Spark plugs 24 N•m (17 lbf•ft) (5)

ADDITIONAL INFORMATION :Apply where indicated ; (1) Loctite 242 (blue)

(2) Loctite 271 (red)

(3) Loctite 515

(4) Synthetic grease

(5) Anti-seize lubricant

* 717 engine only

;

WARNING : Correct torques and use of Loctite must be strictly followed.