Technical data

Section 02 MAINTENANCE
Sub-Section 03 (WATER-FLOODED ENGINE)
02-03-2
NOTE : If engine does not start after sever-
al attempts, check ignition system for spark
occurence. Refer to ELECTRICAL SYSTEM, 08-
02.
Check crankshaft if needed, it can become mis-
aligned or deflected. Refer to ENGINE, 04-03.
After engine has started, spray BOMBARDIER
LUBE lubricant through air intake silencer while
engine is running.
1. Air intake silencer cover
2. Pull plug
3. Spray BOMBARDIER LUBE here
Run engine until it reaches its normal operating
temperature.
CAUTION : Water must be supplied to the
engine to avoid overheating.
F01F25A
1
2
3
-
www.SeaDooManuals.net