User`s manual

ARS-3020 User’s Manual

2.6 Replace the Hard Drive

It is the same as those mentioned in 2.4, but power off the host PC and all operating

ARS-3020s first.

Figure 2-9

NOTICE

1. It is recommended not to attach any single-ended device to the SCSI

adapter connecting with ARS-3020. It will drop down the performance

of ARS-3020.

2. It is invalid to adjust DIP switch during operation. Before changing the

setting, power off the host PC and ARS-3020 first. You had better set

JBOD or Normal mode right in the beginning. The later change may

damage the stored data.

Terminator

Host External

SCSI Port

ARS-3020 SCSI ports

(2 port functions the

same for connection)