User`s guide

Preface
v
European Regulations
When installed in the SS-1200 chassis, this equipment complies with all applicable European Regulations.
Safety
Warning To ensure safe and correct operation of the I/O module installed in a SS-1200-FCAL subsystem
all safety precautions and instructions referred to in this installation guide must be followed
thoroughly.
The plug-in I/O module is part of the SS-1200-FCAL subsystem fire enclosure and must only be
removed when a replacement can be immediately added. The system must not be run without all
units in place.
Moving and Handling
Please observe the following precautions before moving and handling the SS-1200-FCAL enclosure or the I/O
module.
• Keep all plug-in modules packaged to protect them until they are required for installation.
• Take care not to drop any of the plug-in modules or strike them onto a hard surface.
ESD Precautions
Warning Ensure that you have checked and fitted a suitable anti-static wrist or ankle strap and observe all
conventional ESD precautions when handling SS-1200-FCAL plug-in modules and components.
Avoid contact with backplane components and module connectors, etc.
Year 2000 Compliance
It is confirmed that all SS-1200 subsystem products have been designed and developed with Year 2000 compliance.