User`s guide

FCAL Drive Module
vi
ESD Precautions
Warning Ensure that you have checked and fitted a suitable anti-static wrist or ankle strap and observe all
conventional ESD precautions when handling SS-1200-FC-AL plug-in modules and components.
Avoid contact with backplane components and module connectors, etc.
Year 2000 Compliance
It is confirmed that all SS-1200 subsystem products have been designed and developed with Year 2000 compliance.
Preface
What is in this guide
This installation guide gives you step-by-step instructions on how to install the FC-AL drive carrier in your SS-
1200-FCAL enclosure system. It also provides troubleshooting and maintenance information.
Who should use this guide
This installation guide assumes that you have s a working knowledge of the FC-AL environment into which you are
installing the Salient system with its associated plug-in modules. If you do not have these skills, or are not confident
with the instructions in this guide, do not proceed with the installation.
Related publications
The SS-1200-FCAL Installation/User Guide gives you step-by-step instructions on how to install, configure and
connect the SS-1200-FCAL storage subsystem to your host computer system, and tells you how to use and maintain
the system.
The SS-1200 LRC I/O Module Installation Guide gives you step-by-step instructions on how to install the FC-
AL LRC I/O module in a SS-1200-FCAL enclosure.
The SS-1200 OEM Developer’s Guide provides sufficient information to enable third party system designers and
integrators to integrate, install and maintain a SS-1200 system within a FC-AL environment.