Operating instructions

16
10. Hit the ESCAPE button
11. Press the 3 button to select Player 2
12. Hold the OPTION key and hit RECALL, then turn the JOG WHEEL until you see the
CLIP you just created in step 4., then hit ENTER to load the CLIP on Player 1.Press the 2
button to select Player 1
13. Hold the Escape Button and press the Up Arrow key
14. Keep pressing the Up Arrow Key until you see Delay
15. Press the TOGGLE button and enter 03:00:00:00 (or any other delay) using the numeric
keypad then press the ENTER button. This will locate both recorder and player to 0 time
code. The recorder will start recording and the player will wait for three hours (or any
value set in delay), then it will start playing
To end the time delay operation, select the record channel (channel 1), go to the Controller Menu
(4) Delay Mode and press the TOGGLE button.
To stop the playback but keep the V1 recording, select the playback channel, go to the Controller
Menu (4) Delay Mode and press the TOGGLE button.