User guide

Galaxy 55 User Guide
46
4.9.1.2 Inserting the Module
1 Push the replacement module gently home into the bay, ensure that it is fully engaged and that the retention latches
are engaged into the chassis.
2 Fit and tighten the earth screw and washer on the front panel to secure the module (Figure 4–3).
.
3 If required, check that the correct voltage range has been selected.
4 Insert the power cord.
Note The alarm will sound until the new Power Supply/Cooling module is operating correctly.
Figure 4–2 Removing a power supply/Cooling module
Figure 4–3 Fitting the Grounding Screw