Installation guide

Hawk 2LP (Wide) Installation Guide, Rev. A 1
Introduction
This manual is organized to assist you in the installation
and operation of your Seagate Hawk 2LP (wide bus)
family disc drive. Family models are listed in the Prod-
uct Information section. It also provides information to
aid in obtaining service for the drive. The Hawk 2LP
(wide) family drives have a 16 bit data interface.
Before attempting any installation, please read through
all applicable sections of this document, including all
warnings and cautions.
Warning.
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with these instructions, may cause inter-
ference to radio communications.
Electromagnetic interference (EMI) con-
siderations
The drive(s) described herein, as delivered, are de-
signed for system integration and installation into a
suitable enclosure prior to use. As such, the drive(s)
described herein are supplied as a subassembly and
are not subject to Subpart J of Part 15 of the FCC Rules