Product manual

Byte 4
The current operating definition field contains the value of
the current operating definition.
Byte 5
The SAVIMP bit is always 0; therefore, the current operating
definition parameter cannot be saved. If the SAVIMP bit is
1, the current operating parameter can be saved.
The default operating definition field contains the value of
the default operating definition. If no operating definition is
saved, the drive uses the default operating definition.
Bytes 6–8
If the SAVIMP bit is 0, the default definition parameter
cannot be saved. If the SAVIMP bit is 1, the default definition
parameter can be saved.
The supported operating definition field contains the value
of the supported operating definition. If no supported oper-
ating definition is saved, the drive uses the default operating
definition.
D.2.3 Firmware Numbers page (C0
H
)
The Firmware Numbers page is shown below. The table summarizes the
function and default value of each bit.
Bytes
Bits
76543210
0 Peripheral qualifier Peripheral device type
1 Page code (C0
H
)
2 Reserved (00
H
)
3 Page length (0CH)
4–7 Controller firmware number
8–11 Boot firmware number
12–15 Servo firmware number
Bytes 4–7
The controller firmware number field contains the control-
ler firmware number in ASCII text.
Bytes 8–11
The boot firmware number field contains the boot firm-
ware number in ASCII text.
Bytes 12–15
The servo firmware number field contains the servo firm-
ware in ASCII text.
122 Medalist Pro 2160N/2160WC Product Manual, Rev. A