user manual

Server component identification 71
iLO/Redundant ROM override switch (SW5)
The iLO/Redundant ROM override switch (SW5) is a two-position switch that is used for miscellaneous purposes. The
iLO security override switch allows you full access to the iLO processor. This access is necessary if you lost your
password or if the iLO boot-block must be flashed.
Figure 65 iLO/Redundant ROM override switch (SW5)
Table 25 iLO/Redundant ROM override switch (SW5)
1 Off iLO security override The override allows the
administrator full access
to the iLO processor.
Open (off)
Normal
Closed (on)
Override
2 Off Redundant bootblock
select
This override forces
booting from the
redundant bootblock.
Open (off)
Normal
Closed (on)
Redundant bootblock
(ROM)