User's Manual
Table Of Contents
- SATA Product Manual
- Seagate® Technology Support Services
- 1.1 Introduction
- 1.2 Drive specifications
- 1.2.1 Specification summary tables
- 1.2.2 Formatted capacity
- 1.2.3 Recording and interface technology
- 1.2.4 Start/stop times
- 1.2.5 Power specifications
- 2.6 Environmental limits
- 1.2.6 Acoustics
- 1.2.7 Test for Prominent Discrete Tones (PDTs)
- 1.2.8 Electromagnetic immunity
- 1.2.9 Reliability
- 1.2.10 HDD and SSD Regulatory Compliance and Safety
- 1.2.11 Corrosive environment
- 1.2.12 Reference documents
- 1.2.13 Product warranty
- 1.3 Configuring and mounting the drive
- 1.4 Serial ATA (SATA) interface
Seagate IronWolf Pro Serial ATA Product Manual, Rev. C 37
www.seagate.com Serial ATA (SATA) interface
8..15
Current Settings (QWord)
63 Shall be set to one 1
62:19 Reserved 0
18 successful ncq command sense data enabled 0
17 dlc enabled 0
16 dsn enabled 0
15 epc enabled 1
14 Reserved 0
13 volatile write cache enabled 1
12 Reserved 0
11 reverting to defaults enabled 0
10 sense data enabled 0
9 Reserved 0
8 non-volatile write cache 0
7read look-ahead 1
6smart enabled 1
5 Reserved 0
4 Reserved 0
3 puis enabled 0
2apm enabled 0
1 free-fall enabled 0
0wrv enabled 0
16..23
Feature Settings (QWord)
63 Contents of the QWord are valid 1
62:18 Reserved 0
17:16 power source 0
15:8 apm level 0
7:0 wrv mode 0
24..31
DMA Host Interface Sector Times (QWord)
63 Contents of the QWord are valid 1
62:16 Reserved 0
15:0 dma sector time 0
32..39
PIO Host Interface Sector Times (QWord)
63 Contents of the QWord are valid 1
62:16 Reserved 0
15:0 pio sector time 0
Table 9 Identify Device Data log (Continued)