User's Manual
Table Of Contents
- X16 SATA Product Manual
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Recording and interface technology
- 2.4 Start/stop times
- 2.5 Power specifications
- 2.6 Environmental limits
- 2.7 Acoustics
- 2.8 Test for Prominent Discrete Tones (PDTs)
- 2.9 Electromagnetic immunity
- 2.10 Reliability
- 2.11 HDD and SSD Regulatory Compliance and Safety
- 2.12 Corrosive environment
- 2.13 Reference documents
- 2.14 Product warranty
- 3.0 Configuring and mounting the drive
- 4.0 About self-encrypting drives
- 4.1 Data encryption
- 4.2 Controlled access
- 4.3 Random number generator (RNG)
- 4.4 Drive locking
- 4.5 Data bands
- 4.6 Cryptographic erase
- 4.7 Authenticated firmware download
- 4.8 Power requirements
- 4.9 Supported commands
- 4.10 RevertSP
- 4.11 ATA Security Erase Unit Command on SED SATA drives
- 4.12 Sanitize Device - CRYPTO SCRAMBLE EXT
- 5.0 Serial ATA (SATA) interface
Seagate Exos X16 SATA Product Manual, Rev. J 12
www.seagate.com Drive specifications
2.5 Power specifications
The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 2 on page 24 .
2.5.1 Power consumption
Power requirements for the drives are listed in Table 6. Typical power measurements are based on an average of
drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature..
.
Table 6 DC power requirements (16TB and 14TB)
6.0Gb mode
Voltage +5V +12V Watts
Regulation ± 5% ± 10% Total
Avg Idle Current * 0.24 0.32 5.09
Advanced Idle Current *
Idle_A 0.24 0.32 5.07
Idle_B 0.20 0.19 3.24
Idle_C 0.19 0.13 2.47
Standby 0.18 0.01 1.06
Maximum Start Current
DC (peak DC) 0.90 2.04
AC (Peak DC) 1.14 2.76
Delayed motor start (max) DC 0.26 0.08
Operating current (random read 4K16Q):
Typical DC 0.43 0.65 9.96
Maximum DC 0.43 0.65
Maximum DC (peak) 1.29 2.40
Operating current (random write 4K16Q)
Typical DC 0.34 0.38 6.30
Maximum DC 0.35 0.39
Maximum DC (peak) 0.86 2.52
Operating current (sequential read 64K16Q)
Typical DC 0.81 0.32 7.82
Maximum DC 0.81 0.32
Maximum DC (peak) 1.08 1.33
Operating current (sequential write 64K16Q)
Typical DC 0.68 0.31 7.12
Maximum DC 0.69 0.31
Maximum DC (peak) 0.81 1.06