Product Manual Pipeline HD® ST2000VM002 ST1500VM002 ST1000VM002 100633414 Rev.
Document Revision History Revision Date Description of changes Rev. A 07/12/2010 Initial release. Rev. B 01/07/2011 Added to the feature list; updated specifications. Rev. C 04/25/2011 Added updated AFR and warranty info; added AFR section. Updated words 88 and 89 in Table 7. Rev. D 08/04/2011 Added 1TB model and related specifications. © 2011 Seagate Technology LLC. All rights reserved. Publication number: 100633414, Rev.
Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1 About the Serial ATA Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.0 Drive Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pipeline HD SATA Product Manual, Rev.
Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Typical Current Profiles (5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Typical Current Profiles (12V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching SATA cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting dimensions (2TB and 1.5TB models) . . . . . . . . . . . . . . . .
Pipeline HD SATA Product Manual, Rev.
Seagate Technology Support Services For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers For information regarding Warranty Support, visit http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance For information regarding data recovery services, visit http://www.i365.
Pipeline HD SATA Product Manual, Rev.
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Pipeline HD® SATA model drives: ST2000VM002 ST1500VM002 ST1000VM002 These drives provide the following key features: • 5900 RPM spindle speed • High instantaneous (burst) data-transfer rates with a default of 6Gb/s (ST1000VM002) and 3Gb/s (ST1500VM002 and ST2000VM002). Limit settings for 1.5Gb/s and 3.0Gb/s are available via S.M.A.R.T. Command Transport command. • Support for S.M.A.R.
Introduction www.seagate.com In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disk drive in your current system and expect all of your existing applications to work as normal. The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host adapter.
2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST2000VM002 ST1500VM002 ST1000VM002 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual.
Drive Specifications www.seagate.com Table 1 Drive specifications summary for 2TB,1.5TB, and 1TB models (Continued) Drive Specification ST2000VM002 ST1500VM002 ST1000VM002 Power-on to ready (max) <17s <17s <6s Standby to ready (max) <17s <17s <6s Track-to-track seek time (typical) <1.0ms read; <1.2ms write <1.0ms read; <1.2ms write <1.0ms read; <1.2ms write Average seek (typical) <12ms read; <13ms write <12ms read; <13ms write <8.5ms read; <9ms write 2.0A 2.0A 2.
www.seagate.com 2.2 Drive Specifications Formatted capacity Model Formatted capacity* Guaranteed sectors Bytes per sector ST2000VM002 2TB 3,907,029,168 4096 (512 bytes per sector emulated at the interface) ST1500VM002 1.5TB 2,930,277,168 4096 (512 bytes per sector emulated at the interface) ST1000VM002 1TB 1,953,525,168 4096 (512 bytes per sector emulated at the interface) *One Gbyte equals one billion bytes when referring to hard drive capacity.
Drive Specifications 2.5 www.seagate.com Physical characteristics Maximum height 2TB and 1.5TB models 26.1mm / 1.028 in 1TB model 20.20mm / 0.795 in Maximum width 101.6mm / 4.0 in (± 0.010 in) Maximum length 147.00mm / 5.78 in Typical weight 2TB and 1.5TB models 635g / 1.39 lb 1TB model 415g / 0.915 lb Cache buffer 2.6 64MB (65,536kb) Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics.
www.seagate.com Drive Specifications 2.8.1 Power consumption Power requirements for the drives are listed in Table 2 on page 15. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.
Drive Specifications www.seagate.com Figure 1 Typical Current Profiles (5V) Figure 2 Typical Current Profiles (12V) 16 Pipeline HD SATA Product Manual, Rev.
www.seagate.com Drive Specifications 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12V line or an equivalent 15-ohm resistive load on the +5V line. • Using 12V power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10MHz. • Using 5V power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10MHz. Note.
Drive Specifications 2.9 www.seagate.com Environmental specifications 2.9.1 Drive case temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Drive case temperature should be measured at the location indicated in Figure 4. Operating 0° to 75°C (32° to 167°F) Nonoperating –40° to 70°C (–40° to 158°F) 2.9.
www.seagate.com Drive Specifications The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs (for 2TB and 1.5TB models) and 350 Gs (for 1TB) based on a nonrepetitive half-sine shock pulse of 2ms duration. 2.9.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws.
Drive Specifications www.seagate.com 2.10 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. Note For seek mode tests, the drive is placed in seek mode only.
www.seagate.com Drive Specifications 2.12 Reliability - Annualized Failure Rate The product will achieve an Annualized Failure Rate (AFR) of 0.55% when operated in an environment of ambient air temperatures of 25°C. Operation at temperatures outside the specifications shown in Section 2.9 may increase the product AFR. AFR is a population statistics that is not relevant to individual units.
Drive Specifications www.seagate.com Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA). 2.14.3 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device).
www.seagate.com Drive Specifications "O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined by the China RoHS MCV Standard. "X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over the threshold defined by the China RoHS MCV Standard. 2.
Drive Specifications 24 www.seagate.com Pipeline HD SATA Product Manual, Rev.
3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic discharge (ESD) hazards.
Configuring and Mounting the Drive www.seagate.com Figure 3 Attaching SATA cabling Signal connector Power connector Signal cable Power cable Each cable is keyed to ensure correct orientation. Pipeline HD drives support latching SATA connectors. 3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions.
www.seagate.com Configuring and Mounting the Drive Figure 4 Mounting dimensions (2TB and 1.5TB models) Recommended case temperature measurement location Pipeline HD SATA Product Manual, Rev.
Configuring and Mounting the Drive www.seagate.com Figure 5 Mounting dimensions (1TB model) Recommended case temperature measurement location 28 Pipeline HD SATA Product Manual, Rev.
4.0 Serial ATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA modes 0 to 6. For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. 4.
Serial ATA Interface www.seagate.com Table 6 Serial ATA connector pin definitions (Continued) Segment Pin Power Function Definition P1 V33 3.3V power P2 V33 3.3V power P3 V33 3.3V power, pre-charge, 2nd mate P4 Ground 1st mate P5 Ground 2nd mate P6 Ground 2nd mate P7 V5 5V power, pre-charge, 2nd mate P8 V5 5V power P9 V5 5V power P10 Ground 2nd mate P11 Ground or LED signal If grounded, drive does not use deferred spin P12 Ground 1st mate.
www.seagate.
Serial ATA Interface www.seagate.com Table 7 Supported ATA commands (Continued) Command name Command code (in hex) Security Erase Prepare F3H Security Erase Unit F4H Security Freeze F5H Security Set Password F1H Security Unlock F2H Seek 70H Set Features EFH Set Max Address F9H Note: Individual Set Max Address commands are identified by the value placed in the Set Max Features register as defined to the right.
www.seagate.com Serial ATA Interface Table 7 Supported ATA commands (Continued) Command name Command code (in hex) Write Multiple C5H Write Multiple Extended 39H Write Multiple FUA Extended CEH Write Sectors 30H Write Sectors Without Retries 31H Write Sectors Extended 34H Write Stream DMA Extended 3AH Write Stream Extended 3BH Write Uncorrectable 45H 4.3.
Serial ATA Interface www.seagate.
www.seagate.com Serial ATA Interface Table 8 Identify Device commands (Continued) Word Description Value 81 Minor version number 0028H 82 Command sets supported 346BH 83 Command sets supported 7D69H 84 Command sets support extension (see note following this table) 4133H See Word 108-111 note.
Serial ATA Interface www.seagate.com Table 9 Bit Descriptions Description (if bit is set to 1) 36 Bit Word 63 0 Multiword DMA mode 0 is supported. 1 Multiword DMA mode 1 is supported. 2 Multiword DMA mode 2 is supported. 8 Multiword DMA mode 0 is currently active. 9 Multiword DMA mode 1 is currently active. 10 Multiword DMA mode 2 is currently active. Bit Word 84 0 SMART error login is supported. 1 SMART self-test is supported. 2 Media serial number is supported.
www.seagate.com Serial ATA Interface Table 9 Bit Descriptions (Continued) 9 Ultra DMA mode 1 is currently active. 10 Ultra DMA mode 2 is currently active. 11 Ultra DMA mode 3 is currently active. 12 Ultra DMA mode 4 is currently active. 13 Ultra DMA mode 5 is currently active. 14 Ultra DMA mode 6 is currently active. 4.3.2 Set Features command This command controls the implementation of various features that the drive supports.
Serial ATA Interface www.seagate.com Table 10 Set Features command values (Continued) 55H Disable read look-ahead (read cache) feature. 82H Disable write cache. 86H Disable the PUIS feature set. 90H Disable use of SATA features. AAH Enable read look-ahead (read cache) feature (default). F1H Report full capacity available. Note At power-on, or after a hardware or software reset, the default values of the features are as indicated above. 4.3.3 S.M.A.R.T. commands S.M.A.R.T.
Index A ACA 22 Acceleration 19 Acoustics 20 Active 17 Active mode 17 Agency certification 21 Altitude 18 Ambient temperature 14, 18 Areal density 9, 13 ATA commands 30 Australia/New Zealand Standard AS/NZ CISPR22 22 Australian Communication Authority (ACA) 22 Australian C-Tick 22 Average latency 14 Average seek time 14 B Buffer 14 C Cables and connectors 25 Cache 14 Capacity 13 CE mark 21 Certification 21 Check Power Mode 30 China RoHS directive 22 Compatibility 21 Conducted noise 17 Conducted RF immunity
L Latency 14 LBA mode 13 Length 14 Logical geometry 13 M Master/slave 10 Mounting 26 Mounting screws 18 Mounting the drive 25 N Noise 17 Nominal power 14 Nonoperating shock 18 Nonoperating vibration 19 O Operating 15 Operating shock 18 Operating vibration 19 P Physical characteristics 14 Point-to-point 10, 25 Power consumption 15 Power dissipation 15 Power modes 17 Power specifications 14 Power-management modes 17 Power-on to Ready 14 Precautions 25 Printed circuit board 25 Programmable power management
Standby mode 15, 17 Standby timer 17 Standby to Ready 14 Start/stop times 14 Static-discharge 25 Subassembly 22 Surge immunity 20 T Temperature 14, 18 Temperature gradient 18 Timer 17 Timers 17 Track density 13 Track-to-track 14 Track-to-track seek time 14 Tunneling magnetoresistive (TMR) recording heads 9 U UL60950-1 21 V Vibration 19 Voltage 15 Voltage dips, interrupts 20 Voltage tolerance 17 W Weight 14 Wet bulb temperature 18 Width 14 Write Buffer 32 Write DMA 32 Write DMA Extended 32 Write DMA FUA
Pipeline HD SATA Product Manual, Rev.
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100633414, Rev.
