Product manual

Product Manual - Hawk 2 Family SCSI-2 (Volume 1), Rev. C 29
_________________________________________________________________________________________
7.6 Mechanical specifications
The following nominal dimensions are exclusive of the decorative front panel accessory. Refer to Figure 7.6-1 for
detailed mounting configuration dimensions. See section 7.6.3, Drive mounting.
Height: 1.62 in 41.1 mm
Width: 4.00 in 101.6 mm
Depth: 5.74 in 145.8 mm
Weight: 2.1 pounds 0.93 kilograms
Figure 7.6-1a. Mounting configuration dimensions for “N/ND” model drives
A
F
D
E
C
[1]
[3]
B
G
J
H
K
[2]
Notes:
[1]
[2]
[3]
[4]
Inches Millimeters
5.74
4.00
1.62
2.362
.620
4.000
.250
1.750
3.750
2.370
1.725
4.100
0.19
0.015
145.80
101.60
41.15
60.00
15.75
101.60
6.35
44.45
95.25
60.20
43.82
104.14
4.83
0.381
A
B
C
D
E
F
G
H
J
K
L
M
N
P
±
±
+
–
±
±
±
+
–
±
±
±
±
±
±
max
0.010
0.010
0.026
0.010
0.010
0.010
0.010
0.010
0.005
0.010
0.010
0.010
0.010
0.010
0.010
±
±
+
–
±
±
±
+
–
±
±
±
±
±
±
max
.25
.25
.66
.12
.25
.25
.25
.25
.12
.25
.25
.25
.25
.25
.25
L
[4]
M
N
[4]
P
Mounting holes three on each side, 6-32 UNC. Max
screw length into side of drive 0.15 in. (3.81 mm).
Screw tightening torque 6.0 in-lb (.675 NM) max with
minimum thread engagement of 0.12 in. (3.00 mm).
Mounting holes four on bottom, 6-32 UNC. Max
screw length into bottom of drive 0.20 in. (5.08 mm).
Screw tightening torque 6.0 in-lb (.675 NM) max with
minimum thread engagement of 0.12 in. (3.00 mm).
Power and interface connections can extend past the "A"
dimension by 0.040 in. (1.02 mm).
Decorative front panel.