User Manual
Table Of Contents
- X16 SATA Product Manual
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Recording and interface technology
- 2.4 Start/stop times
- 2.5 Power specifications
- 2.6 Environmental limits
- 2.7 Acoustics
- 2.8 Test for Prominent Discrete Tones (PDTs)
- 2.9 Electromagnetic immunity
- 2.10 Reliability
- 2.11 Agency and Safety Certifications
- 2.12 Environmental protection
- 2.13 Corrosive environment
- 2.14 Reference documents
- 2.15 Product warranty
- 3.0 Configuring and mounting the drive
- 4.0 About self-encrypting drives
- 4.1 Data encryption
- 4.2 Controlled access
- 4.3 Random number generator (RNG)
- 4.4 Drive locking
- 4.5 Data bands
- 4.6 Cryptographic erase
- 4.7 Authenticated firmware download
- 4.8 Power requirements
- 4.9 Supported commands
- 4.10 RevertSP
- 4.11 ATA Security Erase Unit Command on SED SATA drives
- 4.12 Sanitize Device - CRYPTO SCRAMBLE EXT
- 5.0 Serial ATA (SATA) interface
Seagate Exos X16 SATA Product Manual, Rev. F 38
www.seagate.com Serial ATA (SATA) interface
NOTE See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.
93 Hardware reset value xxxx
H
95–99 ATA-reserved 0000
H
100–103 Total number of user-addressable LBA sectors available.
These words are required for drives that support the 48-bit addressing feature.
Maximum value: 0000FFFFFFFFFFFFh.
(see Section 2.2)
104–105 ATA-reserved 0000
H
106 Physical/Logical sector size 6003
H
(512E) / 5000
H
(4KN)
107 ATA-reserved 0000
H
108–111 The mandatory value of the world wide name (WWN) for the drive.
NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support.
Each drive will have a unique value.
112–118 ATA-reserved 0000
H
119 Commands and feature sets supported 43DE
H
120 Commands and feature sets supported or enabled 40DC
H
121-127 ATA-reserved 0000
H
128 Security status 0021
H
129–159 Seagate-reserved xxxx
H
160–167 ATA-reserved 0000
H
168 Device Nominal Form Factor 3.5“
169–205 ATA-reserved 0000
H
206 SCT Command Transport command set.
If bit 0 is set to one, then the device supports SCT Command Transport.
Bits 7:2 indicate individual SCT feature support.
xxBD
H
207-216 ATA-reserved 0000
H
217 Nominal media rotation rate 7200
218-221 ATA-reserved 0000
H
222 Transport Major Version 11FF
H
(SATA 3.3)
223 Transport Minor Version 0000
H
224-229 ATA-reserved 0000
H
230-233 Extended Number of User Accessible Sectors (see Section 2.2)
234-254 ATA-reserved 0000
H
255 Integrity word xxA5
H
Table 15 Identify Device command
Word Description Value