User Manual
Table Of Contents
- X16 SATA Product Manual
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Recording and interface technology
- 2.4 Start/stop times
- 2.5 Power specifications
- 2.6 Environmental limits
- 2.7 Acoustics
- 2.8 Test for Prominent Discrete Tones (PDTs)
- 2.9 Electromagnetic immunity
- 2.10 Reliability
- 2.11 Agency and Safety Certifications
- 2.12 Environmental protection
- 2.13 Corrosive environment
- 2.14 Reference documents
- 2.15 Product warranty
- 3.0 Configuring and mounting the drive
- 4.0 About self-encrypting drives
- 4.1 Data encryption
- 4.2 Controlled access
- 4.3 Random number generator (RNG)
- 4.4 Drive locking
- 4.5 Data bands
- 4.6 Cryptographic erase
- 4.7 Authenticated firmware download
- 4.8 Power requirements
- 4.9 Supported commands
- 4.10 RevertSP
- 4.11 ATA Security Erase Unit Command on SED SATA drives
- 4.12 Sanitize Device - CRYPTO SCRAMBLE EXT
- 5.0 Serial ATA (SATA) interface
Seagate Exos X16 SATA Product Manual, Rev. F 47
www.seagate.com Serial ATA (SATA) interface
8..15
Current Settings (QWord)
63 Shall be set to one 1
62:19 Reserved 0
18 successful ncq command sense data enabled 0
17 dlc enabled 0
16 dsn enabled 0
15 epc enabled 1
14 Reserved 0
13 volatile write cache enabled 1
12 Reserved 0
11 reverting to defaults enabled 0
10 sense data enabled 1
9 Reserved 0
8 non-volatile write cache 1
7read look-ahead 1
6smart enabled 1
5 Reserved 0
4 Reserved 0
3 puis enabled 0
2apm enabled 0
1 free-fall enabled 0
0wrv enabled 0
16..23
Feature Settings (QWord)
63 Contents of the QWord are valid 1
62:18 Reserved 0
17:16 power source 0
15:8 apm level 0
7:0 wrv mode 0
24..31
DMA Host Interface Sector Times (QWord)
63 Contents of the QWord are valid 1
62:16 Reserved 0
15:0 dma sector time 0
32..39
PIO Host Interface Sector Times (QWord)
63 Contents of the QWord are valid 1
62:16 Reserved 0
15:0 pio sector time 0
Table 16 Identify Device Data log (continued)