User Manual
Table Of Contents
- X16 SATA Product Manual
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Recording and interface technology
- 2.4 Start/stop times
- 2.5 Power specifications
- 2.6 Environmental limits
- 2.7 Acoustics
- 2.8 Test for Prominent Discrete Tones (PDTs)
- 2.9 Electromagnetic immunity
- 2.10 Reliability
- 2.11 Agency and Safety Certifications
- 2.12 Environmental protection
- 2.13 Corrosive environment
- 2.14 Reference documents
- 2.15 Product warranty
- 3.0 Configuring and mounting the drive
- 4.0 About self-encrypting drives
- 4.1 Data encryption
- 4.2 Controlled access
- 4.3 Random number generator (RNG)
- 4.4 Drive locking
- 4.5 Data bands
- 4.6 Cryptographic erase
- 4.7 Authenticated firmware download
- 4.8 Power requirements
- 4.9 Supported commands
- 4.10 RevertSP
- 4.11 ATA Security Erase Unit Command on SED SATA drives
- 4.12 Sanitize Device - CRYPTO SCRAMBLE EXT
- 5.0 Serial ATA (SATA) interface
Seagate Exos X16 SATA Product Manual, Rev. F 51
www.seagate.com Serial ATA (SATA) interface
56..511 Reserved
07 Parallel ATA
000..511 (Not supported for SATA drives) all zeros
08 Serial ATA
0..7
Serial ATA page information header (QWord)
63 Shall be set to 1 1
62:24 Reserved
23:16 Page number 08
8..15
SATA Capabilities
63 Shall be set to one 1
62:32 Reserved 0
31 power disable feature always enabled 0
30 power disable feature supported 0
29 rebuild assist supported 0
28 dipm ssp preservation supported 0
27 hybrid information supported 0
26 devsleep to reducedpwrstate capability supported 0
25 device sleep supported 0
24 ncq autosense supported 1
23 software settings preservation supported 1
22 hardware feature control supported 0
21 in-order data delivery supported 0
20 device initiated power management supported 1
19 dma setup auto-activation supported 1
18 nonzero buffer offsets supported 0
17 send and receive queued commands supported 1
Table 16 Identify Device Data log (continued)