User Manual

Seagate Exos X16 SATA Product Manual, Rev. F 52
www.seagate.com Serial ATA (SATA) interface
16 ncq non-data command supported 0
15 ncq streaming supported 0
14 read log dma ext as equivalent to read log ext supported 1
13 device automatic partial to slumber transitions supported 0
12 host automatic partial to slumber transitions supported 0
11 ncq priority information supported 0
10 unload while ncq commands are outstanding supported 1
9 sata phy event counters log supported 1
8 receipt of host initiated power management requests supported 0
7 ncq feature set supported 1
6:3 Reserved 0
2 sata gen3 signaling speed supported 1
1 sata gen2 signaling speed supported 1
0 sata gen1 signaling speed supported 1
16..23
Current SATA Settings (QWord)
63 Shall be set to one 1
62:14 Reserved 0
13 hybrid enabled 0
12 rebuild assist enabled 0
11 power disable feature enabled 0
10 device sleep enabled 0
9 automatic partial to slumber transitions enabled 0
8 software settings preservation enabled 1
7 hardware feature control is enabled 0
6 in-order data delivery enabled 0
5 device initiated power management enabled 0
4 dma setup auto-activation enabled 1
3 nonzero buffer offsets enabled 0
2:0 current negotiated serial ata signal speed (6.0, 3.0, 1.5) Gb/s
Table 16 Identify Device Data log (continued)