User's Manual
Table Of Contents
- SATA Product Manual
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Recording and interface technology
- 2.4 Start/stop times
- 2.5 Power specifications
- 2.6 Environmental limits
- 2.7 Shock and Vibration
- 2.8 Acoustics
- 2.9 Test for Prominent Discrete Tones (PDTs)
- 2.10 Electromagnetic immunity
- 2.11 Reliability
- 2.12 HDD and SSD Regulatory Compliance and Safety
- 2.13 Corrosive environment
- 2.14 Reference documents
- 2.15 Product warranty
- 2.16 Seagate® Rescue™ Data Recovery Service
- 3.0 Configuring and mounting the drive
- 4.0 Serial ATA (SATA) interface
Seagate IronWolf Pro SATA Product Manual, Rev. G 24
3.4.1 Mechanical specifications
Refer to Figure 4 for detailed mounting configuration dimensions. See “Drive mounting” on page 23.
Figure 4. Mounting configuration dimensions 8TB & 6TB models (Option 1)
Weight: 8TB & 6TB models 1.579 lb 716g
4TB models 1.431 lb 649g
Note
These dimensions conform to the Small Form Factor Standard documented in
SFF-8301 and SFF-8323, found at www.sffcommittee.org
Note The image is for mechanical dimension reference only and may not represent the actual drive.
2X 1.750±.010
2X 3.000±.010
3X 3.750±.010
3X.125±.010
2X 1.432±.020
2X 1.625±.020
.814±.020
C
L
OF DRIVE
C
L
OF CONN
3X .250±.010
BOTH SIDES
1.122±.020
1.638±.010
4.000±.010
1.028 MAX
[26.10MM]
.138±.015
2.000
C
L
OF DRIVE
5.787 MAX
[147.00 MM]
4.000±.010
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.160 ± 0.10 x 90
MAX TORQUE: 6 IN-LBS
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.169 ± 0.16 x 90
MAX TORQUE: 6 IN-LBS
BREATHER HOLE
DO NOT COVER