User's Manual
Table Of Contents
- SATA Product Manual
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Recording and interface technology
- 2.4 Start/stop times
- 2.5 Power specifications
- 2.6 Environmental limits
- 2.7 Shock and Vibration
- 2.8 Acoustics
- 2.9 Test for Prominent Discrete Tones (PDTs)
- 2.10 Electromagnetic immunity
- 2.11 Reliability
- 2.12 HDD and SSD Regulatory Compliance and Safety
- 2.13 Corrosive environment
- 2.14 Reference documents
- 2.15 Product warranty
- 2.16 Seagate® Rescue™ Data Recovery Service
- 3.0 Configuring and mounting the drive
- 4.0 Serial ATA (SATA) interface
Seagate IronWolf Pro SATA Product Manual, Rev. G 5
1.0 Introduction
This manual describes the functional, mechanical and interface specifications for the following:
Seagate® IronWolf® Pro Serial ATA model drives:
These drives provide the following key features:
• 7200 RPM spindle speed.
• Full-track multiple-sector transfer capability without local processor intervention.
• High instantaneous (burst) data-transfer rates (up to 600MB per second).
• Native Command Queuing with command ordering to increase performance in demanding applications.
• Perpendicular recording technology provides the drives with increased areal density.
• PowerChoice™ for selectable power savings
• SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Supports latching SATA cables and connectors.
• Tarnish-resistant components to help protect drive from environmental elements, increasing field reliability.
• Worldwide Name (WWN) capability uniquely identifies the drive.
5xxE Standard models
ST8000NE001 ST4000NE001
ST6000NE000
Note
Seagate recommends validating the configuration with the selected HBA/
RAID controller manufacturer to ensure use of full capacity is supported.