User Manual
Table Of Contents
- SATA Product Manual
- 1.0 Introduction
- 2.0 Drive Specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Default logical geometry
- 2.4 Recording and interface technology
- 2.5 Physical characteristics
- 2.6 Start/stop times
- 2.7 Power specifications
- 2.8 Environmental specifications
- 2.9 Acoustics
- 2.10 Electromagnetic immunity
- 2.11 Warranty
- 2.12 Agency and Safety Certifications
- 2.13 Environmental protection
- 2.14 Corrosive environment
- 3.0 Configuring and Mounting the Drive
- 4.0 SATA Interface
Seagate BarraCuda Product Manual, Rev. F 27
www.seagate.com
107 ATA-reserved 0000
H
108-111
The mandatory value of the world wide name (WWN) for the drive.
NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support.
Each drive will have a unique value.
112-118 ATA-reserved 0000
H
119 Commands and feature sets supported 41DE
H
120 Commands and feature sets supported or enabled 409C
H
121-127 ATA-reserved 0000
H
128 Security status 0021
H
129–159 Seagate-reserved xxxx
H
160–167 ATA-reserved 0000
H
168 Device Nominal Form Factor 0002
H
169-205 ATA-reserved 0000
H
206 SCT Command Transport 10A5
H
207-208 ATA-reserved 0000
H
209 Alignment of logical blocks within a physical block 4000
H
210-216 ATA-reserved 0000
H
217 Nominal media rotation rate 1C20
H
218-221 ATA-reserved 0000
H
222 Transport major version number 107F
H
223-229 ATA-reserved 0000
H
230-233 Extended Number of User Addressable Sectors ST2000DM008 = 3,907,029,168
234–254 ATA-reserved 0000
H
255 Integrity word xxA5
H
Note
Advanced Power Management (APM) and Automatic Acoustic
Management (AAM) features are not supported.
Note
See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.
Table 9 Identify Device commands (continued)
Word Description Value