Specification Sheet

Specications
SATA 6Gb/s
6TB
1, 2
5TB
1,2
4TB
1,2
2TB
1
Standard Model Number (4K Native) ST6000NM0004 — ST4000NM0004 ST2000NM0004
Standard Model Number (512 Emulation) ST6000NM0024 ST5000NM0084 ST4000NM0024 ST2000NM0024
SED Model Number (4K Native) ST6000NM0064
3
— ST4000NM0064
3
ST2000NM0064
3
SED Model Number (512 Emulation) ST6000NM0044
3
— ST4000NM0044
3
ST2000NM0044
3
SED-FIPS Model Number (4K Native) ST6000NM0094
3,4
— — —
SED-FIPS Model Number (512 Emulation) ST6000NM0084
3,4
— — —
PowerBalance Model Number (512 Emulation) ST6000NM0124 ST5000NM0124 ST4000NM0124 —
Features
Humidity Sensor Yes Yes Yes Yes
Super Parity Yes Yes Yes Yes
Low Halogen Yes Yes Yes Yes
PowerChoice
™
Technology Yes Yes Yes Yes
Hot-Plug Support
6
Yes Yes Yes Yes
Cache, Multisegmented (MB) 128 128 128 128
Reliability/Data Integrity
Mean Time Between Failures (MTBF, hours) 2.0M 2.0M 2.0M 2.0M
Reliability Rating @ Full 24x7 Operation (AFR) 0.44% 0.44% 0.44% 0.44%
Nonrecoverable Read Errors per Bits Read 1 sector per 10E15 1 sector per 10E15 1 sector per 10E15 1 sector per 10E15
Power-On Hours per Year 8760 (24x7) 8760 (24x7) 8760 (24x7) 8760 (24x7)
Limited Warranty (years) 5 5 5 5
Performance
Spindle Speed (RPM) 7200 7200 7200 7200
Interface Access Speed (Gb/s) 6.0, 3.0, 1.5 6.0, 3.0, 1.5 6.0, 3.0, 1.5 6.0, 3.0, 1.5
Max. Sustained Transfer Rate OD (MB/s) up to 226 up to 226 up to 226 up to 226
Average Latency (ms) 4.16 4.16 4.16 4.16
Interface Ports Single Single Single Single
Rotation Vibration @ 1500 Hz (rad/s²) 12.5 12.5 12.5 12.5
Power Consumption
Idle Power, Average (W) 8.0 8.0 5.23 3.71
Typical Operating, Random Read (W) 10.62 10.62 9.50 7. 92
Power Supply Requirements +12V and +5V +12V and +5V +12V and +5V +12V and +5V
Environmental
Temperature, Operating (°C) 5 to 60 5 to 60 5 to 60 5 to 60
Vibration, Nonoperating: 10Hz to 500Hz (Grms) 5.0 5.0 5.0 5.0
Shock, Operating, 2ms (Read/Write) (Gs) 70/40 70/40 70/40 70/40
Shock, Nonoperating, 1ms and 2ms (Gs) 250 300 300 300
Physical
Height (in/mm, max)
6
1.028/26.1 1.028/26.1 1.028/26.1 1.028/26.1
Width (in/mm, max)
6
4.010/101.85 4.010/101.85 4.010/101.85 4.010/101.85
Depth (in/mm, max)
6
5.878 /147.0 5.878 /147.0 5.878 /147.0 5.878 /147.0
Weight (lb/g) 1.720/780 1.720/780 1.400/635 1.344/605
Carton Unit Quantity 20 20 20 20
Cartons per Pallet 40 40 40 40
Cartons per Layer 8 8 8 8
Enterprise Capacity 3.5 HDD
1 One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes when referring to drive capacity.
2 Seagate recommends validating your conguration with your HBA/RAID controller manufacturer to ensure full capacity capabilities.
3 Self-Encrypting Drives (SED) and FIPS 140-2 Validated drives are not available in all models or countries. May require TCG-compliant host or controller support.
4 FIPS 140-2 in review. See FIPS 140-2 Level 2 Certicate at: http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401val2011.htm#1635
5 These base deck dimensions conform to the Small Form Factor Standard (SFF-8201) found at www.scommittee.org. For connector-related dimensions, see
SFF-8223.
6 Supports Hotplug operation per Serial ATA Revision 2.6 specication.
12Gb/s SAS Specications on Next Page