Installation guide

Using the torque wrench, attach the ground cable that is shipped with the system to the back of the system cabinet
as shown in Figure 2-3, being careful not to apply more than 33 inch-pounds of torque.
5.
The ground cable may be attached to the double ground lugs found on either the left or right
side of the cabinet.
Figure 2-3. Attaching the Ground Cable (Top of cabinet)
Installing the Core Components
file:///H|/CSDoc/leoinstall/chapt2.htm (3 of 14) [01/14/2000 3:50:40 PM]