Installation guide

9600 EIA and auxiliary (Aux) baud rate●
Odd parity●
One stop bit●
To install a V105, follow these steps.
Locate the terminal data cable (part number AW-B15201-25) in one of the cartons shipping with the system.1.
Connect the terminal data cable to the V105 terminal's SES1-EIA port and to the cabinet's Console port (J315),
(See Figure 2-5) . After the cable is connected, tighten its connector screws with a flat-blade screwdriver.
2.
An additional terminal can be connected to the Auxiliary Console port (J316).
For additional information, see HP-UX Operating System: Peripherals
Configuration (R1001H-04-ST).
Figure 2-5. Connecting the V105 Data Cable
Connect the keyboard to the terminal as shown in Figure 2-6. 3.
Installing the Core Components
file:///H|/CSDoc/leoinstall/chapt2.htm (6 of 14) [01/14/2000 3:50:40 PM]