Installation guide

Connect the RS-232 cable (AW-B10102-25) to the modem EIA RS-232-C connector as shown in Figure 2-15.
Tighten the connector screws with a flat-blade screwdriver.
5.
Figure 2-15. Connecting the RS-232 Cable to the Modem
Attach the adapter (part number JD-025PLG-07) to the RSN port (J317) on the cabinet, then connect the RS-232
cable to the adapter as shown in Figure 2-16.
6.
Figure 2-16 Connecting the RS-232 Cable to the System
Installing the Core Components
file:///H|/CSDoc/leoinstall/chapt2.htm (11 of 14) [01/14/2000 3:50:41 PM]