Installation guide

This script verifies that the RSN setup is correct and displays the following message:

rsn_setup: completed successfully

If the script displays error messages, take corrective actions as indicated by the script.

To verify the configuration, you must first make sure the RSN is disabled by issuing the rsnoff script as shown

in the following example.

/usr/stratus/rsn/bin/rsnoff

Press the <Return> key to continue. The script displays the /etc/inittab settings and asks you if they are correct.

The settings should be correct. Press the letter y followed by the <Return> key to continue. The script displays a line from

the file /var/spool/cron/crontabs/rsn and asks you if this line should be commented out. Press the letter y

followed by the <Return> key to continue. If the script completes execution successfully, it displays the following

messages:

RSNTRANS HAS BEEN DISABLED

/etc/inittab SETTINGS ARE COMMITTED

RSN IS NOW OFF

To finish verifying the configuration, execute the rsnon script as shown in the following example. This script

enables the RSN to work properly.

/usr/stratus/rsn/bin/rsnon

This script displays the following message and prompt. Press the <Return> key to continue.

1. Setting rsn_monitor, rsn_getty, rsndbs to respawn in /etc/inittab.

2. Enabling the rsntrans entry in /var/spool/cron/crontabs/rsn.

3. If any errors are encountered, no changes are committed.

Press return to continue or q to quit...

The script displays the RSN inittab settings and asks you if they are correct. The settings should be

correct. Press y followed by the <Return> key to continue.

**************************************************

Configuring the RSN and C419/C619 Modem

file:///H|/CSDoc/leoinstall/chapt5.htm (12 of 14) [01/14/2000 3:50:53 PM]