.......................................... Barracuda 7200.7 Family .......................................... ST3160021A, ST3160023A, .......................................... ST3120022A, ST3120026A, .......................................... ST380011A, ST380013A, .......................................... ST340014A .......................................... Ultra ATA Interface Drives .......................................... Product Manual ..........................................
........................................ Barracuda 7200.7 Family ........................................ ST3160021A, ST3160023A, ........................................ ST3120022A, ST3120026A ........................................ ST380011A, ST380013A, ........................................ ST340014A ........................................ Ultra ATA Interface Drives ........................................ Product Manual ........................................
©2002, 2003 Seagate Technology LLC All rights reserved Publication number: 100217281, Rev. D May 2003 Seagate, Seagate Technology, and the Seagate logo are either registered trademarks or trademarks of Seagate Technology LLC. Barracuda, DiscWizard, SeaFAX, SeaFONE, SeaTDD, and 3D Defense System are either registered trademarks or trademarks of Seagate Technology LLC. Other product names are registered trademarks or trademarks of their owners.
Revision status summary sheet Revision Date Writer/PLM Sheets Affected Rev. A Rev. B Rev. C Rev. D 01/28/03 01/29/03 04/15/03 05/02/03 L. Newman/J. Knight L. Newman/J. Knight L. Newman/J. Knight L. Newman/J. Knight All. Pages 19, 25, 35, and 36. Pages 5 and 26. Pages 7, 32, 33, 34, and 36.
Barracuda 7200.7 Product Manual, Rev. D v Contents 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary table . . . . . . . . . . . . . . . . . . . . . . . 3 2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2.1 LBA mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.
vi Barracuda 7200.7 Product Manual, Rev. D 4.0 ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4.1 ATA interface signals and connector pins . . . . . . . . . . . . 25 4.1.1 Supported ATA commands. . . . . . . . . . . . . . . . 27 4.1.2 Identify Device command . . . . . . . . . . . . . . . . . 29 4.1.3 Set Features command. . . . . . . . . . . . . . . . . . . 33 4.1.4 S.M.A.R.T. commands . . . . . . . . . . . . . . . . . . . 35 5.
Barracuda 7200.7 Product Manual, Rev. D vii List of Figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Typical 5V startup and operation current profile . . . . . . . . . Typical 12V startup and operation current profile . . . . . . . . Master/slave jumper settings . . . . . . . . . . . . . . . . . . . . . . . Ultra ATA cable connectors . . . . . . . . . . . . . . . . . . . . . . . . Mounting dimensions—top, side and end view. . . . . . . . . . I/O pins and supported ATA signals . . . . .
viii Barracuda 7200.7 Product Manual, Rev.
Barracuda 7200.7 Product Manual, Rev. D 1.0 1 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate® Barracuda® 7200.7 model drives: • • • • • • • ST3160021A ST3160023A ST3120022A ST3120026A ST380011A ST380013A ST340014A These drives provide the following key features: • 7,200-RPM spindle speed and 2-Mbyte buffer (8 Mbytes on ST3160023A, ST3120026A, and ST380013A models) combine for superior desktop performance.
2 Barracuda 7200.7 Product Manual, Rev.
Barracuda 7200.7 Product Manual, Rev. D 2.0 3 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate ST3160021A, ST3160023A, ST3120022A, ST3120026A, ST380011A, ST380013A, and ST340014A model drives. 2.1 Specification summary table The specifications listed in this table are for quick reference.
4 Drive specification Barracuda 7200.7 Product Manual, Rev. D ST3160021A ST3160023A ST3120022A ST3120026A ATA data-transfer modes supported Cache buffer ST380011A ST380013A ST340014A PIO modes 0–4 Multiword DMA modes 0–2 Ultra DMA modes 0–5 2 Mbytes (2,048 kbytes) on ST3160021A, ST3120022A, ST380011A, and ST340014A models 8 Mbytes (8,192 kbytes) on ST3160023A, ST3120026A, and ST380013A models Height (mm max) 26.035 mm (1.028 inches) Width (mm max) 101.6 mm (4.000 inches) Length (mm max) 146.
Barracuda 7200.7 Product Manual, Rev. D ST3160021A ST3160023A Drive specification Ambient temperature 5 ST3120022A ST3120026A ST380011A ST380013A ST340014A 0° to 60°C (operating) –40° to 70°C (nonoperating) Temperature gradient (°C per hour max) 20°C (operating) 30°C (nonoperating) Relative humidity 5% to 90% (operating) 5% to 95% (nonoperating) Relative humidity gradient 30% per hour max Wet bulb temperature (°C max) 30 (operating) 40 (nonoperating) Altitude, operating –60.
6 Barracuda 7200.7 Product Manual, Rev. D 2.2 Formatted capacity Formatted capacity Guaranteed sectors Bytes per sector ST3160021A ST3160023A 160 Gbytes 312,581,808 512 ST3120022A ST3120026A 120 Gbytes 234,441,648 512 ST380011A ST380013A 80 Gbytes 156,301,488 512 ST340014A 40 Gbytes 78,165,360 512 Model 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above.
Barracuda 7200.7 Product Manual, Rev. D 2.5 7 Recording and interface technology Interface ATA Recording method 16/17 EPRML Recording density BPI (bits/inch max) 595,000 Track density TPI (tracks/inch max) 94,600 Areal density (Mbits/inch2 max) 56.3 Spindle speed (RPM) (± 0.2%) 7,200 Internal data-transfer rate OD (Mbytes/sec max) 85.
8 2.7 Barracuda 7200.7 Product Manual, Rev. D Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: • Track-to-track seek time is an average of all possible single-track seeks in both directions. • Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead.
Barracuda 7200.7 Product Manual, Rev. D 2.9.1 9 Power consumption Power requirements for the drives are listed in the table on page 10. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.
10 Power dissipation (watts, ST3160021A, 2-disc) Spinup Barracuda 7200.7 Product Manual, Rev. D Average (watts, 25° C) 5V typ amps 12V typ amps — — 2.8 (peak) Idle 7.5 0.482 0.424 Idle* (with offline activity) 9.3 0.587 0.530 Operating 40% r/w. 40% seek, 20% inop. 12.0 0.638 0.739 Seeking 12.5 0.412 0.870 Standby 0.900 0.144 0.015 Sleep 0.900 0.144 0.015 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T.
Barracuda 7200.7 Product Manual, Rev. D 2.9.1.1 11 Typical current profile 1.2 1.0 0.8 Amps 0.6 0.4 0.2 +5 Volt Current during spindle start — Typical Amperes 0.0 1 2 3 4 5 6 7 8 9 Seconds Figure 1. Typical 5V startup and operation current profile 3.0 +12 Volt Current during spindle start — Typical Amperes 2.5 2.0 Amps 1.5 1.0 0.5 0.0 0 1 2 3 4 5 6 7 Seconds Figure 2.
12 2.9.2 Barracuda 7200.7 Product Manual, Rev. D Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz.
Barracuda 7200.7 Product Manual, Rev. D 13 command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary.
14 2.10.2 Barracuda 7200.7 Product Manual, Rev. D Temperature gradient Operating: 20°C per hour (68°F per hour max), without condensation Nonoperating: 30°C per hour (86°F per hour max) 2.10.3 Humidity 2.10.3.1 Relative humidity Operating: 5% to 90% noncondensing (30% per hour max) Nonoperating: 5% to 95% noncondensing (30% per hour max) 2.10.3.2 Wet bulb temperature Operating: 30°C (86°F max) Nonoperating: 40.0°C (104°F max) 2.10.4 Altitude Operating: –60.
Barracuda 7200.7 Product Manual, Rev. D 2.10.5 15 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.10.5.1 Operating shock These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second. 2.10.5.
16 Barracuda 7200.7 Product Manual, Rev. D 2.11 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. Note. For seek mode tests, the drive is placed in seek mode only.
Barracuda 7200.7 Product Manual, Rev. D 2.
18 Barracuda 7200.7 Product Manual, Rev. D 2.14 Agency certification 2.14.1 Safety certification The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America. 2.14.2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive (89/336/ EEC).
Barracuda 7200.7 Product Manual, Rev. D 19 • Trade name or applicant: Seagate Technology • Manufacturing date: January 2003 • Manufacturer/nationality: Singapore and China Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA). 2.14.
20 Barracuda 7200.7 Product Manual, Rev. D from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication number 004-000-00345-4.
Barracuda 7200.7 Product Manual, Rev. D 3.0 21 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static discharge precautions After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic discharge (ESD) hazards. Observe the following standard handling and static-discharge precautions: Caution: • The SeaShell™ replaces electrostatic discharge (ESD) bags.
22 Barracuda 7200.7 Product Manual, Rev. D 3.2 Jumper settings 3.2.1 Master/slave configuration The options jumper block shown in Figure 3 is used to configure the drive for operation. It is the 8-pin dual header between the interface connector and the power connector. Use the following settings to configure the drive as a master or a slave. Master or single drive. The drive is configured at the factory for a master or single-drive operation with a jumper set on pins 7 and 8. Drive as slave.
Barracuda 7200.7 Product Manual, Rev. D 3.2.3 23 Alternate capacity jumper Some older computers may “hang” at startup if their BIOS detects a disc drive with a capacity greater than 32 Gbytes. This limits the drive’s capacity to 32 Gbytes when the alternate capacity jumper is used.
24 3.3 Barracuda 7200.7 Product Manual, Rev. D Drive mounting You can mount the drive in any orientation using four screws in the sidemounting holes or four screws in the bottom-mounting holes. See Figure 5 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws.
Barracuda 7200.7 Product Manual, Rev. D 4.0 25 ATA interface These drives use the industry-standard ATA task file interface that supports 16-bit data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–5. The drive also supports the use of the IORDY signal to provide reliable high-speed data transfers. You can use a daisy-chain cable to connect two drives to a single AT host bus.
26 Barracuda 7200.7 Product Manual, Rev.
Barracuda 7200.7 Product Manual, Rev. D 4.1.1 27 Supported ATA commands The following table lists ATA-standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Draft ATA-6 Standard. See “S.M.A.R.T. commands” on page 35 for details and subcommands used in the S.M.A.R.T. implementation.
28 Barracuda 7200.7 Product Manual, Rev. D Command name Command code (in hex) Set Multiple Mode C6H S.M.A.R.T.
Barracuda 7200.7 Product Manual, Rev. D 4.1.2 29 Identify Device command The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in the table on page 27. All reserved bits or words should be set to zero. Parameters listed with an “x” are drive-specific or vary with the state of the drive. See Section 2.0 on page 3 for default parameter settings.
30 Barracuda 7200.7 Product Manual, Rev.
Barracuda 7200.7 Product Manual, Rev.
32 Barracuda 7200.7 Product Manual, Rev. D Word Description Value 95–99 ATA-reserved 0000H 100–103 Total number of user-addressable LBA sectors available These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh.
Barracuda 7200.7 Product Manual, Rev. D Note. 33 See the bit descriptions below for words 63, 88, and 93 of the Identify Drive data: Description (if bit is set to 1) 4.1.3 Bit Word 63 0 Multiword DMA mode 0 is supported. 1 Multiword DMA mode 1 is supported. 2 Multiword DMA mode 2 is supported. 8 Multiword DMA mode 0 is currently active. 9 Multiword DMA mode 1 is currently active. 10 Multiword DMA mode 2 is currently active. Bit Word 88 0 Ultra DMA mode 0 is supported.
34 Barracuda 7200.7 Product Manual, Rev. D value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the Features register are defined as follows: 02H Enable write cache (default). 03H Set transfer mode (based on value in Sector Count register). Sector Count register values: 00H Set PIO mode to default (PIO mode 2).
Barracuda 7200.7 Product Manual, Rev. D 4.1.4 35 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor.
36 Barracuda 7200.7 Product Manual, Rev.
Barracuda 7200.7 Product Manual, Rev. D 5.0 37 Seagate Technology support services Online Services Internet www.seagate.com for information about Seagate products and services. rss.seagate.com for information about Seagate backup tape drives and related services. Worldwide support is available 24 hours daily by e-mail for your disc or tape questions. Presales Support: Disc: www.seagate.com/support/email/email_presales.html or DiscPresales@Seagate.com Tape: www.seagate.
38 Barracuda 7200.7 Product Manual, Rev. D Seagate resellers through real-time pricing and availability, fast and easy comparison shopping, and seamless integration with key distributors for a one-stop shopping experience. For support, questions and comments: Internet: reseller.seagate.com/benefits/index.
Barracuda 7200.7 Product Manual, Rev. D 39 vice center representative for warranty-related issues. Resellers or end users of drive products should contact their place of purchase or one of the Seagate warranty service centers for assistance. Have your drive’s “ST” model number and serial number available. Authorized Service Centers In some countries outside the US, you can contact an Authorized Service Center for service.
40 Barracuda 7200.7 Product Manual, Rev. D European Support Services For European presales, technical support, and warranty service, dial the tollfree number for your specific country. If your country is not listed here, dial our European call center at +31-20-316-7222 from 8:30 A.M. to 5:00 P.M. (Central Europe time) Monday through Friday. The European call center is located in Amsterdam, The Netherlands.
Barracuda 7200.7 Product Manual, Rev. D 41 Asia/Pacific Support Services For Asia/Pacific presales and technical support, dial the toll-free number for your specific country. The Asia/Pacific toll-free numbers are available from 6:00 A.M. to 10:45 A.M. and 12:00 P.M. to 6:00 P.M. (Australian Eastern time) Monday through Friday, except as noted. If your country is not listed here, direct dial one of our technical support locations.
42 Barracuda 7200.7 Product Manual, Rev.
Barracuda 7200.7 Product Manual, Rev.
44 Barracuda 7200.7 Product Manual, Rev.
Barracuda 7200.7 Product Manual, Rev.
46 Barracuda 7200.7 Product Manual, Rev.
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100217281, Rev.
