User manual

ManualsBrandsSeagate ManualsAutomobile AccessoriesST3655N

100

SANtools® S.M.A.R.T. Disk Monitor (SMARTMon-UX)94

DExcpt : 0, 0, 0

TEST : 0, 0, 0

EBACKERR : 0, 0, 0 {R/O}

LogErr : 1, 1, 1

MRIE : 2, 2, 2 {R/O}

Interval timer : 00000BB8h, 00000BB8h, 00000BB8h

Report count : 00000002h, 00000002h, 00000002h

Program Ended.

1.26.4 Example Mode Page Dump - SCSI Tape

The results below were run under Windows XP using a Tandberg SLR7 Tape

C>\scratch>smartmon-ux -J \\.\TAPE0

com

Discovered TANDBERG SLR7 S/N "SN007005396" on \\.\TAPE0 (tape) [Bus/Port/ID.LUN=0/3/12.0]

Read-Write Error Recovery : Page [01h] (Factory, Current, Saved)

Transfer block (TB) : 0, 0, 0 {R/O}

Enable early recovery (EER) : 1, 1, 1 {R/O}

Post error (PER) : 0, 0, 0 {R/O}

Disable transfer on error (DTE) : 0, 0, 0 {R/O}

Disable correction (DCR) : 0, 0, 0

Read retry count (RRC) : 24, 24, 24

Write Retry Count (WRC) : 16, 16, 16

Disconnect-Reconnect : Page [02h] (Factory, Current, Saved)

Buffer full ratio (BFR) : 16, 16, 16

Buffer empty ratio (BER) : 16, 16, 16

Bus inactivity limit (BIL) : 0, 0, 0 {R/O}

Disconnect time limit (DTL) : 0, 0, 0 {R/O}

Connect time limit (CTL) : 0, 0, 0 {R/O}

Maximum burst size (MBS) : 0, 0, 0

Enable modify data pointers (EMDP) : 0, 0, 0 {R/O}

Fair arbitration (FA) : 0, 0, 0 {R/O}

Disconnect immediate (DImm) : 0, 0, 0 {R/O}

Data transfer disconnect control (DTDC) : 0, 0, 0 {R/O}

First burst size (FBS) : 0, 0, 0 {R/O}

Control Mode : Page [0Ah] (Factory, Current, Saved)

Task set type (TST) : 0, 0, 0 {R/O}

Task mgmt only (TMF_ONLY) : 0, 0, 0 {R/O}

Descriptor format (D_SENSE) : 0, 0, 0 {R/O}

Global logging disable (GLTSD) : 0, 0, 0 {R/O}

Report log excp. (RLEC) : 0, 0, 0

Queue alg. modifier (QAM) : 0, 0, 0 {R/O}

Queue error mgmt (QERR) : 0, 0, 0 {R/O}

(DQUE) : 0, 0, 0 {R/O}

(VS) : 0, 0, 0 {R/O}

Report check (RAQ) : 0, 0, 0 {R/O}

Unit attn interlocks (UA_INTLCK) : 0, 0, 0 {R/O}

Software write prot (SWP) : 0, 0, 0 {R/O}

(RAERP) : 0, 0, 0 {R/O}

(UUAERP) : 0, 0, 0 {R/O}

(EAERP) : 0, 0, 0 {R/O}

App tag owner (ATO) : 0, 0, 0 {R/O}

Task aborted status (TAS) : 0, 0, 0 {R/O}

Autoload mode (AUTOL) : 0, 0, 0 {R/O}

Ready AER holdoff period (RAER) : 0, 0, 0 {R/O}

Busy timeout period (BTP) : 65535, 65535, 65535 {R/O}

Extended self-test time (ESTCT) : 0, 0, 0 {R/O}

Data Compression : Page [0Fh] (Factory, Current, Saved)

DCE : 1, 0, 1

DCC : 1, 1, 1 {R/O}

DDE : 1, 1, 1

RED : 0, 0, 0