User manual

SANtools® S.M.A.R.T. Disk Monitor (SMARTMon-UX)102
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00f0: 00 00 00 00 00 00 00 00 00 61 73 68 00 00 00 00 .........ash....
0100: FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 ................
0110: 00 00 00 00 00 00 00 00 00 61 73 68 00 00 00 00 .........ash....
0120: FF FF FF FF 00 00 00 00 00 64 65 00 00 00 00 00 .........de.....
0130: FF FF FF FF 00 00 00 00 01 0B 23 D4 00 04 10 00 ..........#.....
0140: 00 00 00 0A 00 04 00 00 00 00 10 00 00 00 00 03 ................
0150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0190: 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 ................
01a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
01b0: 01 0F 33 D4 00 00 00 00 00 00 00 06 00 00 00 00 ..3.............
01c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
01d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
01e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
01f0: 00 00 00 00 00 00 00 00 67 00 50 F6 00 00 00 00 ........g.P.....
Decoded Partition Header Information----------------------------------------------------
Num Name Start nBlocks Type Description
0 root 266240 17507284 SGI XFS Root partition, used for root filesystem
1 swap 4096 262144 Raw data Virtual memory space
8 volhdr 0 4096 Volume header Volume header
10 volume 0 17773524 Entire volume The entire disk including volume header
Decoded Volume Header Information -------------------
Num Label StartBlock Size(Bytes) Size(KB)
0 sgilabel 2 512 0
1 ide 621 323072 315
2 sash 1252 323072 315
3 - 0 0 0
4 - 0 0 0
5 - 0 0 0
6 - 0 0 0
7 - 0 0 0
8 - 0 0 0
9 - 0 0 0
10 - 0 0 0
11 - 4294967295 0 0
12 - 0 0 0
13 - 4294967295 0 0
14 - 4294967295 0 0
1.29 Ping Command
You may add the -ping command to modify reporting behavior when devices are polled. This option is added to
polling operations to report if a device has been removed or no longer reporting. You would generally use this
function if you have an environment where you might not necessarily care about the health of a device, but you do
want to know if the device has been removed.
This was added as an enhancement for some national security-related organization that needed 24x7 monitoring to
make sure that no peripherals were removed. The default operation of the software is to just ignore a device if it is no
longer reporting.
This is what will be logged with a 10-second polling and a ping. The disk at /dev/sdf is an external ATA disk drive
attached via a USB port. The command that was issued was:
./smartmon-ux -ping -L /dev/sdf -F 10 /dev/sdf
Wed Mar 23 19:45:45 2005: ./smartmon-ux started
Wed Mar 23 19:45:45 2005: Discovered WDC WD25 00JB-75FUA0 S/N " " on /dev/sdf (SMART unsupported)(238418 MB)
Wed Mar 23 19:46:05 2005: /dev/sdf polled at Wed Mar 23 07:46:05 2005 Status:Online [WDC WD25 00JB-75FUA0]
Wed Mar 23 19:46:15 2005: /dev/sdf polled at Wed Mar 23 07:46:15 2005 Status:Offline [S/N= ]
Wed Mar 23 19:46:45 2005: /dev/sdf polled at Wed Mar 23 07:46:45 2005 Status:Online [S/N= ]
Wed Mar 23 19:46:55 2005: /dev/sdf polled at Wed Mar 23 07:46:55 2005 Status:Online [WDC WD25 00JB-75FUA0]