User manual
Using S.M.A.R.T. Disk Monitor 129
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
SMARTMon-ux [Release 1.23, Build 07-DEC-2003] - Copyright 2003 SANtools, Inc.
http://www.SANtools.com
Cannot open /etc/hba.conf
Error loading HBA API library (Error):HBA library version: 1
Number of supported adapters: 0
Error unloading HBA API library (Error):[root@morph smartmon]#
[root@morph smartmon]#
If this happens, then you probably do not have the drivers loaded. Please consult the online documentation for your
HBA supplier and download and install the necessary files. Your HBA firmware may also have to be updated to
support the SNIA library, so you should try to read their documentation.
If everything is in order, then you would typically see something like below. The meanings of most of this information
should be somewhat obvious. For those fields that make no sense at all to you, chances are good that you would not
know what to do with the information now that you have it anyway. If you are having problems then the data would be
very useful to your storage subsystem, switch or hub vendors, and your fibre channel HBA vendor.
Here are some results, first from a PC running Windows 2000 ...
SMARTMon-ux [Release 1.23, Build 07-DEC-2003] - Copyright 2003 SANtools, Inc. http://www.SANtools.com
Number of supported adapters: 1
Adapter #0 Description: [OK]
Name: QLogic-ql2300-1
Manufacturer: QLogic Corporation
Serial number: J98685
Model: QLA2340
Model description: QLogic QLA2340 PCI Fibre Channel Adapter
Node WWN: 20:00:00:E0:8B:0F:1D:3D
Node symbolic name:
Hardware version: FC5010409-11
Driver version: 8.2.3.11 (w32 VI)
Option ROM version: 1.34
Firmware version: 3.02.14
VendorSpecific ID: 1
Number of ports: 1
Driver name: ql2300.sys
Event logging support: [OK]
Total number of events: 0
HBA end port attributes (Device #0): [OK]
WWN (node name): 20:00:00:E0:8B:0F:1D:3D
WWN (port name): 21:00:00:E0:8B:0F:1D:3D
WWN (port fabric):
Number of discovered ports: 0
FC ID: 00-00-00
Type: NLPORT (Public Loop)
State: ONLINE
Supported classes of service: 3
Supported FC-4 TYPEs: 0201000000000000000000000000000000000000000000000000000000000000
Active FC-4 TYPEs: 0001000000000000000000000000000000000000000000000000000000000000
Symbolic port name:
OS Device name: \\.\Scsi2:
Current speed: 2 Gbps
Supported speed(s): 1, 2 Gbps
Max frame size: 2048
Device Port #0 Statistics: [OK]
Seconds since statistics last reset: n/a
Total frames transmitted: n/a
Total words transmitted: n/a
Total frames received: n/a
Total words received: n/a
Total LIP events on arbitrated loop: n/a
Total NOS events on switched fabric: n/a
Total error frames: n/a
Total dumped frames: n/a
Total link failures: 0
Total loss of sync: 1