User manual

Using S.M.A.R.T. Disk Monitor 167
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
SMARTMon-UX [Release 1.41, Build 1-NOV-2009] - Copyright 2001-2009 SANtools(R), Inc.
http://www.SANtools.com
ANSI-defined reportable parameters for all (non IDE) devices:
Write errors corrected without substantial delay
Write errors corrected with possible delays
Total write errors
Write errors corrected
Times correction algorithm processed (on writes)
Bytes processed (on writes)
Unrecovered errors (on writes)
Read errors corrected with possible delays
Read errors corrected without substantial delay
Total read errors
Read errors corrected
Times correction algorithm processed (on reads)
Bytes processed (on reads)
Unrecovered errors (on reads)
Read errors corrected without substantial delay
Read errors corrected with possible delays
Total read errors
Read errors corrected
Times correction algorithm processed (on reads)
Bytes processed (on reads)
Unrecovered errors (on reads)
Read-reverse errors corrected without substantial delay
Read-reverse errors corrected with possible delays
Total read-reverse errors
Read-reverse errors corrected
Times correction algorithm processed (on read-reverse)
Bytes processed (on read-reverse)
Unrecovered errors (on read-reverse)
Verify errors corrected without substantial delay
Verify errors corrected with possible delays
Total verify errors
Verify errors corrected
Times correction algorithm processed (on verify)
Bytes processed (on verify)
Unrecovered errors (on verify)
Total non-medium errors
Grown defects during certification
Total blocks reallocated during format
Total new blocks reallocated
Power-on minutes since last format
Bytes received from clients during WRITEs
Number of bytes written (not counting ECC & formatting overhead)
Number of bytes read (note counting ECC & formatting overhead)
Number of bytes transferred to the initiators during READs
Tape Cleaning required - 1 indicates YES
Current temperature +/- 3 degrees C
Reference temperature +/- 3 degrees C
Results of last 3 self tests (details returned in text if not completed successfully)
Device manufactured week/year
Accounting date week/year
Specified max start-stop cycle count
Accumulated start-stop cycles
Specified max load-unload cycle count
Accumulated load-unload cycles
Full TapeAlert information (detailed messages on failure/warning conditions)
Buffer over-run & cause & count info (detailed message)
Buffer under-run & cause & count info (detailed message)
Defined Vendor-specific information for below device families: (All numeric unless otherwise marked)
(COMPAQ) BD0366459B
Total read/write I/Os:
(Any) MAX3073NC
Unknown #1:
Unknown #2:
Unknown #3:
Unknown #4:
BYTE: