User manual

Using S.M.A.R.T. Disk Monitor 185
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
Total MB transferred to host:
Total bytes transferred to host:
Total MB read from tape:
Total bytes read from tape:
Total MB transferred from host:
Total bytes transferred from host:
Total MB written to tape:
Total bytes written to tape:
Cleaning status mask (4=Required, 2=Requested, 1=Cleaning tape expired):
Total loads over lifetime of drive:
Drive temperature in degrees C:
Media ID of most recently used cartridge:
Controller serial number (least significant 16 bits):
Drive cleaning cycle count:
(SEAGATE) CTT8000*,STT2000*
ECC Corrections on even tracks:
ECC Corrections on odd tracks:
Read retries on even tracks:
Read retries on odd tracks:
(Any)
S?173404F*,S?318304F*,S?318451F*,S?318453F*,S?336605F*,S?336704F*,S?373405F*,S?336753F*,S?373453F*,S?3146707
F*,S?3300007F*,S?373207F*,S?3146854F*,S?373454F*,S?336754F*,ST373207FC
Port receiving this command 0=A, 1=B:
Port A link failure count:
Port A loss of synchronization count:
Port A invalid transmission word count:
Port A invalid CRC count:
# of initialize LIPs that this drive generated from Port A:
# of initialize LIPs that this drive received on Port A:
# of failure LIPs that this drive generated from Port A:
# of failure LIPs that this drive received on Port A:
Port B link failure count:
Port B loss of synchronization count:
Port B invalid transmission word count:
Port B invalid CRC count:
# of initialize LIPs that this drive generated from Port B:
# of initialize LIPs that this drive received on Port B:
# of failure LIPs that this drive generated from Port B:
# of failure LIPs that this drive received on Port B:
Logical blocks sent to initiators:
Logical blocks received from initiators:
Logical blocks read from cache, sent to initiators:
Number of read and write commands <= current segment size:
Number of read and write commands > current segment size:
Power-on time in minutes:
Time in minutes until the next scheduled interrupt for a S.M.A.R.T. measurement:
(Any)
S?136403F*,ST3146807F*,ST3146855F*,S?318452F*,S?373307F*,ST373455F*,ST3300655F*,S?336607F*,S?336752F*
Port receiving this command 0=A, 1=B:
Port A link failure count:
Port A loss of synchronization count:
Port A invalid transmission word count:
Port A invalid CRC count:
# of initialize LIPs that this drive generated from Port A:
# of initialize LIPs that this drive received on Port A:
# of failure LIPs that this drive generated from Port A:
# of failure LIPs that this drive received on Port A:
Port B link failure count:
Port B loss of synchronization count:
Port B invalid transmission word count:
Port B invalid CRC count:
# of initialize LIPs that this drive generated from Port B:
# of initialize LIPs that this drive received on Port B:
# of failure LIPs that this drive generated from Port B:
# of failure LIPs that this drive received on Port B:
Logical blocks sent to initiators:
Logical blocks received from initiators:
Logical blocks read from cache, sent to initiators: