User manual
SANtools® S.M.A.R.T. Disk Monitor (SMARTMon-UX)212
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
Number of disk ports: 4 <- Added in 1.30
Inquiry Page Hex Dump:
0000: 00 00 00 02 1F 00 00 02 33 77 61 72 65 20 20 20 ........3ware
0010: 4C 6F 67 69 63 61 6C 20 44 69 73 6B 20 30 30 20 Logical Disk 00
0020: 31 2E 30 1.0
You may use the -z3 option to display physical and logical device information ...
[root@frank smartmon]# ./smartmon-ux -z3 /dev/sg9
SMARTMon-ux [Release 1.28, Build 01-APR-2005] - Copyright 2001-2005 SANtools, Inc. http://www.SANtools.com
Discovered 3ware Logical Disk 00 S/N " " on /dev/sg9 (SMART unsupported)(76283 MB)
Physical Device Dump: (DeviceMake-Model [Firmware] S/N=SerialNumber Blocks DiskNumber.ControllerPort
[DeviceState]
WDC WD2000JD-00FYB0 [02.05D02] S/N=WD-WMAEH2469728 190782 MB at ID.Port 0.1 [OK]
Maxtor 6Y080M0 [YAR51BW0] S/N=Y3JRAGXE 78167 MB at ID.Port 1.3 [OK]
Logical Device Dump:
RAID-1 76283 MB at SCSIID 0 [DEGRADED]
Program Ended.
Reporting AMCC Internal Diagnostic Log (-zd3)
This function should be used in the event the controller or drives report some problem, and can be used by the
manufacturer to further diagnose the problem. The format is controlled by the controller manufacturer, and it is subject
to change. We suggest you do not attempt to write any scripts to parse it.
Here is a subset of a dump. Note the "** End of Diagnostic dump **" string. If you are trying to parse the dump
programmatically, then you may look for this string to indicate the end of the dump.
[root@frank smartmon]# ./smartmon-ux -z3d /dev/sg2
SMARTMonUX [Release 1.30, Build 5-DEC-2005] - Copyright 2001-2005 SANtools, Inc. http://www.SANtools.com
Discovered 3ware Logical Disk 00 S/N " " on /dev/sg2 (SMART unsupported)(190724 MB)
Physical Device Dump: (DeviceMake-Model [Firmware] S/N=SerialNumber Blocks DiskNumber.ControllerPort [DeviceState]
WDC WD2000JD-00FYB0 [02.05D02] S/N=WD-WMAEH2469728 190782 MB at ID.Port 0.0 [OK]
Maxtor 6Y080M0 [YAR51BW0] S/N=Y3JRAGXE 78167 MB at ID.Port 1.3 [OK]
Logical Device Dump:
SINGLEDISK 190724 MB at SCSIID 0 [OK]
SINGLEDISK 76283 MB at SCSIID 1 [OK]
Controller Diagnostic Dump
0 A0 C2 4F 01 01 00
E=0208 I=008E89EC T=00:29:44 : Drive not ready
E=0208 I=008E89EC T=00:29:44 U=0 : Return error status to host
Error, Unit 0: Drive not ready
(EC:0x208, SK=0x04, ASC=0x08, ASCQ=0x00, SEV=01, Type=0x70)
opcode=0xB1
E=0208 I=FFFFD7C4 T=00:29:44 P=0 : Drive not ready, no retries
ata task file written out : cd dh ch cl sn sc ft
: B0 A0 C2 4F 01 01 D1
ata task file read back : st dh ch cl sn sc er
: D0 A0 C2 4F 01 01 00
E=0208 I=008E8A3C T=00:29:44 : Drive not ready
E=0208 I=008E8A3C T=00:29:44 U=0 : Return error status to host
Error, Unit 0: Drive not ready
(EC:0x208, SK=0x04, ASC=0x08, ASCQ=0x00, SEV=01, Type=0x70)
opcode=0xB1
E=0208 I=FFFFD7C4 T=00:29:44 P=0 : Drive not ready, no retries
ata task file written out : cd dh ch cl sn sc ft
: B0 A0 C2 4F 01 01 D1
ata task file read back : st dh ch cl sn sc er
: D0 A0 C2 4F 01 01 00
E=0208 I=008E8A8C T=00:29:44 : Drive not ready
E=0208 I=008E8A8C T=00:29:44 U=0 : Return error status to host
Error, Unit 0: Drive not ready
(EC:0x208, SK=0x04, ASC=0x08, ASCQ=0x00, SEV=01, Type=0x70)