User manual

ManualsBrandsSeagate ManualsAutomobile AccessoriesST3655N

241

242

243

244

245

246

247

248

249

250

SANtools® S.M.A.R.T. Disk Monitor (SMARTMon-UX)238

· All Seagate SAS family disks as of this date added to vendor-specific database

· Additional SATA/ATA-8 commands added to enumerated error list and inquiry version fields

· Additional vendor-specific SMART fields enumerated for Maxtor, Fujitsu, and Seagate SATA disks

· Significantly more information reported for LSI MPT-family RAID controllers (seen in HP, Dell, IBM and other

systems)

· -bmsr command that reports background scanning results enhanced with additional output

· Support for LSI MPT-family RAID controllers added to SPARC Solaris version

· The -O command now works in Windows platform

· Additional return codes added

· (Version 1.36B, released June 2008, adds support for Intel Storage Servers)

· Added additional vendor-specific SATA S.M.A.R.T. entries

Version 1.35 (Released Dec 2007)

· Propagated increased SCSI pass-through buffer enhancement introduced in 1.34 to all LINUX variants

· Added commands to support DELL (LSI) family RAID controllers (-zd) (-zdd) (-zdL)

· Corrected total number of blocks on disk drive as shown on drive testing summary, quantity was last block number

instead of total number of blocks.

· (Enhanced random number generator for secure erase .. it now uses cryptographic-quality ISAAC random number

generator, and EVERY bit is randomized, not just a 16KB repeating pattern throughout the disk.

· Added new return code (12) for secure erase test, used to indicate that data on disk is not random

· SATA/ATA device support improved for SPARC Solaris, full ATA Identification report now generated

· ANSI-standard fields for ATA-8 class devices now enumerated

· Additional fields specific to 3WARE/AMCC 9x00 RAID controllers running firmware released after JUN 2007 added

· New function (-z3m) that dumps 3WARE/AMCC RAID controller event logs added

· Windows 2008 & Vista support added (For X86, IA64, and X86_64 architectures)

· Mac OSX 10.5 support for both Power PC & Intel architectures added

· -securecheck and -securecheckall functions added to Secure Erase

· Secure erase support added for SATA/ATA disks

· Program now reports device make/model as part of low-level format Are-you-sure message

· -Cx command to and/or suppress limitations to field size masks

· Windows-family EMAIL engine now supports -Port command which facilitates setting a non-standard SMTP port to

mail server

· - Secure erase logic now completes the random I/O phase significantly faster, now it takes only 25% more

time then

· the all-ones or all-zeros phase, instead of taking almost 3 X as long.

Version 1.34 (Released Oct 2007)

· (Windows-only) Increased size of SCSI pass-thru buffer from 32K to 64K to support certain vendor-unique log

pages,

· Approx 100 additional reportable fields applicable to Engenio (LSI) external RAID engines added

· Added additional inquiry data reporting specific to SATA disks attached to SAS/SATA controllers (SAT protocol)

· Windows version now utilizes single executable that works for systems that do not have SNIA FC drivers installed

(Previous releases were distributed with 2 separate executables)

· Background media scanning commands added (-bmsd) (-bmse) (-bmsr)

Version 1.33 (Released Jul 2007)

· X86_64 LINUX build released

· Reporting & configuring background media scans added

· Additional vendor-unique log pages added

· (Windows-only) temporary files for windows versions are now saved in user-specific temp file directory instead of

executable's directory.

· (Non-Windows) temp files now start with /tmp/santoolsXXXXXX rather than /tmp/junkXXXXXX

· MAC-address based licensing added for Windows family versions

· Background initialization sub page now reported

· ANSI SES-page A now reported

217

213

111 111