User manual

Using S.M.A.R.T. Disk Monitor 33
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
Total Primary (factory) defects: 1749
Terminating program.
1.11 Enclosure Services Viewer (SAF-TE)
SAF-TE enclosures are the equivalent of SES enclosures, but for SCSI-attached hosts. Unlike SES enclosures,
SAF-TE enclosures have a unique SCSI ID and LUN associated with them. The internal mechanism and commands
that SMARTMon has to use to determine the health of a SAF-TE enclosure are different from those commands used
to communicate with a SES enclosure. The net result is the same, however.
SAF-TE is the name for a specialized command set that is used to manage and sense the state of the power
supplies, cooling devices, displays, indicators, individual drives, and other non-SCSI elements installed in a SCSI
enclosure. If you have a SAF-TE-compliant enclosure, this software can decode and report this information.
Unless you have a very inexpensive enclosure, chances are good that your enclosure is SAF-TE-compliant. If you are
not sure, invoke the -E+ option and find out. Below is sample output from one of our enclosures when we unplugged
one of the power supplies and ran the program on a Windows XP machine.
smartmon-ux -I+ -E+ \\.\SCSI3:
SMARTMon-ux [Release 1.13, Build 4-SEP-2002] - Copyright 2002 SANtools, Inc. http://www.SANtools.com
Discovered CNSi JSS122 S/N " " on \\.\SCSI3: (processor) [SAF-TE] [Adapter/ID.LUN=0/0.6]
Inquiry Text Page Data - ANSI defined fields
Device Type: processor
Peripheral Qualifier: Connected to this LUN
Removable Device: NO
ANSI Version: 3 (SPC ANSI X3.301:1997)
ISO/IEC Version: 0
ECMA Version: 0
Vendor Identification: CNSi
Product Identification: JSS122
Firmware Revision: L421
Async event reporting: NO
Supports 16-bit wide addresses: NO
Supports 32-bit wide addresses: NO
Supports CONTINUE_TASK & TARGET XFR: NO
Terminate task supported: NO
Response data format: 2
Relative addressing supported: NO
Supports request/ACK data transfer: NO
32-bit parallel supported: NO
Normal ACA Supported: NO
Enclosure services available: NO
Multi-ported device: NO
Medium-changer attached: NO
16-bit parallel supported: YES
Synchronous commands supported: YES
Linked commands supported: NO
Command queuing supported: YES
Inquiry Page Hex Dump:
0000: 03 00 03 02 9B 00 00 32 43 4E 53 69 20 20 20 20 .......2CNSi
0010: 4A 53 53 31 32 32 20 20 20 20 20 20 20 20 20 20 JSS122
0020: 4C 34 32 31 30 20 20 20 20 20 20 20 53 41 46 2D L4210 SAF-
0030: 54 45 31 2E 30 30 00 00 0C 00 00 00 00 00 00 00 TE1.00..........
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0060: 43 68 61 70 74 65 63 20 42 72 69 64 67 65 20 4C Chaptec Bridge L
0070: 34 32 31 20 20 20 20 20 00 00 00 00 00 00 00 00 421 ........
0080: 00 00 00 53 44 52 20 20 20 20 20 47 45 4D 32 30 ...SDR GEM20
0090: 30 20 20 20 20 20 20 20 20 20 20 32 20 20 20 0 2
Inquiry EVPD Page #00h
0000: 7F 00 03 02 9B 00 ......
SAF-TE Enclosure dump:
Cooling/Fan #0: Operational
Cooling/Fan #1: Operational