User manual
Using S.M.A.R.T. Disk Monitor 39
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
| PSU / | 2nd | 1st |OPS | PSU / |
| Cooling | LRC | LRC |Panel| Cooling |
| First | 'B' | 'A' | | Second |
| #0 | #1 | #0 | | #1 | <--SES ID#
+--------------------------------------+
Legend for Below: SN=Serial#, (optional)SC=Status Code
LRC-A: SN=PMT317000005619
LRC-B: SN=PMT317000005396
Power Supply#1: SN=IMS4204300008BB
Power Supply#2: SN=IMS4204300007F7
Program Ended.
· The text in RED represents the typical output that you would have regardless of your enclosure manufacturer. This
is the result of decoding only the ANSI-defined information. The BLUE text represents additional information that
might appear if you had an enclosure manufactured by Xyratex.
· If you invoke smartmon-ux with the -E option, the program will run in the background and poll your SES compliant
enclosure(s) at the same time it polls disk drives. If a problem is found, it generates an alert as specified by the
command-line options. If you invoke the program with the -E+ option, all of the current enclosure information will
display and the program will terminate.
· There are dozens of additional informational fields that this program can report, providing your enclosure
manufacturer reports that information to the SES electronics in their engine. Our software reports all SES
elements defined in the specification.
Here is the output from a HP A6214 enclosure for comparison. This enclosure implements SES differently, as it
exposes a SES-specific Fibre Channel ID. The Xyratex enclosure implemented SES services via a pass-through disk
drive. Both methods are defined by the ANSI specification, and both are supported by our software.
Discovered HP A6214A S/N "R16RH1394676" on /dev/rscsi/c4t15d0 [SES] (Enclosure Services)
HP A6214A WWN=50-06-0B-00-00-0C-62-8A:
Device #0 OK Slot=00h
Device #1 OK Slot=01h
Device #2 OK Slot=02h
Device #3 Not Available Slot=03h
Device #4 OK Slot=04h
Device #5 OK Slot=05h
Device #6 OK Slot=06h
Device #7 OK Slot=07h
Device #8 OK Slot=08h
Device #9 OK Slot=09h
Device #10 OK Slot=0ah
Device #11 OK Slot=0bh
Device #12 OK Slot=0ch
Device #13 OK Slot=0dh
Device #14 OK Slot=0eh
Power Supply #0 OK
Power Supply #1 OK
Cooling Element #0 OK fan at speed 4
Cooling Element #1 OK fan at speed 4
Temperature Sensor #0 OK 93F/34C
Temperature Sensor #1 OK 95F/35C
Audible Alarm #0 OK ENABLED
SESElectronics Processor #0 OK [ACTIVE]
SESElectronics Processor #1 OK [PASSIVE]
SCSIPort #0 OK This device did NOT participate in transmission of SES info [Link DOWN]
SCSIPort #1 OK This device did NOT participate in transmission of SES info [Link UP]
SCSIPort #2 OK This device did NOT participate in transmission of SES info [Link DOWN]
SCSIPort #3 OK This device did NOT participate in transmission of SES info [Link DOWN]
VoltageSensor #0 OK Input voltage 33.2 VAC RMS
VoltageSensor #1 OK Input voltage 51.2 VAC RMS
VoltageSensor #2 OK Input voltage 121.6 VAC RMS
VoltageSensor #3 OK Input voltage 33.2 VAC RMS
VoltageSensor #4 OK Input voltage 51.6 VAC RMS
VoltageSensor #5 OK Input voltage 122.4 VAC RMS
VendorSpecific Device (80) Status: 01 00 00 00
VendorSpecific Device (81) Status: 01 00 01 00
35