User manual
Using S.M.A.R.T. Disk Monitor 45
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
XYRATEX SBOD & EBOD (1603)
(Not shown)
1.14.2 Intel SSR212MC2 Enclosure
The software now enumerates Intel's McKay Creek family of enclosures. This product is also known as the Intel
Storage Server SSR212MC2. Unlike the bundled software that Intel supplies, smartmon-ux supports Solaris, all 64-bit
windows variants, and numerous 32/64-bit LINUX variants. SMARTMon-UX is capable of providing full control,
configuration, and monitoring. It will also provide flexibility to use "unsupported" peripherals and controllers, let you
manually or automatically manipulate the LEDs and audible alarms using the standard -EPxx family commands .
Below is the full SES dump as seen on a system running a custom 64-bit kernel
(Note: We discovered a firmware bug in build B55 of the firmware. As of June 2008, they have acknowledge the
defect, and are working on a fix. Specifically, the system is not reporting temperature for CPU1).
# /etc/smartmon-ux -E+ /dev/sg13
SMARTMon-UX [Release 1.36, Build 30-JUN-2008] - Copyright 2001-2008 SANtools(R), Inc. http://www.SANtools.
com
Enclosure fault on Intel SSR212MC WWN=50-05-0C-C1-01-AB-C7-00:
ArrayDevice #0 OK SelID=00h [Row=1 Col=1]
ArrayDevice #1 OK SelID=00h [Row=1 Col=2]
ArrayDevice #2 OK SelID=00h [Row=1 Col=3]
ArrayDevice #3 OK SelID=00h [Row=1 Col=4]
ArrayDevice #4 OK SelID=00h [Row=2 Col=1]
ArrayDevice #5 OK SelID=00h [Row=2 Col=2]
ArrayDevice #6 OK SelID=00h [Row=2 Col=3]
ArrayDevice #7 OK SelID=00h [Row=2 Col=4]
ArrayDevice #8 OK SelID=00h [Row=3 Col=1]
ArrayDevice #9 OK SelID=00h [Row=3 Col=2]
ArrayDevice #10 OK SelID=00h [Row=3 Col=3]
ArrayDevice #11 OK SelID=00h [Row=3 Col=4]
Power Supply #0 OK
Power Supply #1 Not Installed
Cooling Element #0 OK fan at 80% speed [actual speed 9300 rpm]
Cooling Element #1 OK fan at 80% speed [actual speed 9900 rpm]
Cooling Element #2 OK fan at 80% speed [actual speed 9100 rpm]
Cooling Element #3 OK fan at 80% speed [actual speed 10000 rpm]
Cooling Element #4 OK fan at 80% speed [actual speed 9300 rpm]
Cooling Element #5 OK fan at 80% speed [actual speed 10000 rpm]
Cooling Element #6 OK fan at 80% speed [actual speed 9400 rpm]
Cooling Element #7 OK fan at 90% speed [actual speed 10500 rpm]
Cooling Element #8 OK fan at 80% speed [actual speed 9100 rpm]
Cooling Element #9 OK fan at 80% speed [actual speed 10000 rpm]
Temperature Sensor #0 OK 84F/29C
Temperature Sensor #1 OK 79F/26C
Temperature Sensor #2 OK 99F/37C below cpu threshold
Temperature Sensor #3 Not Installed
Temperature Sensor #4 OK 97F/36C
Temperature Sensor #5 OK 79F/26C below cpu threshold
DoorLock #0 OK LOCKED
Audible Alarm #0 OK ENABLED
SESElectronics Processor #0 OK [PASSIVE]
SESElectronics Processor #1 OK [PASSIVE]
SESElectronics Processor #2 OK [PASSIVE]
SESElectronics Processor #3 OK [PASSIVE]
SESElectronics Processor #4 OK [PASSIVE]
SESElectronics Processor #5 OK [PASSIVE]
SESElectronics Processor #6 OK [PASSIVE]
Display Unit #0 OK OFF [Amber fault LED]
Display Unit #1 OK OFF [Blue chassis ID LED]
SAS Connector #0 N/A
T10 Compliance #0 OK [T10 compliance=OFF, Acoustic Mode=Unsupported]
SES Firmware Revision: "3155"
Element Descriptors Information
Array Device (0) "Dk0"
Array Device (1) "Dk1"
35