User manual

SANtools® S.M.A.R.T. Disk Monitor (SMARTMon-UX)82
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
LB cache segment size (LBCSS) : 0, 0, 0 {R/O}
Disable read-ahead (DRA) : 0, 0, 0
Vendor-specific bits (VSS) : 0, 0, 0 {R/O}
Number of cache segments : 32, 32, 32
Cache segment size : 0, 0, 0 {R/O}
Non cache segment size : 0, 0, 0 {R/O}
Control Mode : Page [0Ah] (Factory, Current, Saved)
TST : 0, 0, 0 {R/O}
D_SENSE : 0, 0, 0 {R/O}
GLTSD : 1, 1, 1
RLEC : 0, 0, 0
Queue algorithm modifier : 0, 0, 0
QErr : 0, 0, 0 {R/O}
DQue : 0, 0, 0
TAS : 0, 0, 0 {R/O}
RAQ : 0, 0, 0 {R/O}
UA_INTLCK_CTRL : 0, 0, 0 {R/O}
SWP : 0, 0, 0 {R/O}
RAERP : 0, 0, 0 {R/O}
UUAERP : 0, 0, 0 {R/O}
EAERP : 0, 0, 0 {R/O}
Autoload mode : 0, 0, 0 {R/O}
Ready AER holdoff period : 0, 0, 0 {R/O}
Busy timeout period : 0, 0, 0 {R/O}
Extended self-test completion time : 1488, 1488, 1488 {R/O}
Protocol Specific Port : Page [19h] (Factory, Current, Saved)
Physical interface : Parallel SCSI
Driver strength : 0, 0, 0 {R/O}
Driver asymmetry : 0, 0, 0 {R/O}
Driver precompensation : 0, 0, 0 {R/O}
Driver slew rate : 1, 1, 1 {R/O}
DB(0) Value : 0, 0, 0 {R/O}
DB(1) Value : 0, 0, 0 {R/O}
DB(2) Value : 0, 0, 0 {R/O}
DB(3) Value : 0, 0, 0 {R/O}
DB(4) Value : 0, 0, 0 {R/O}
DB(5) Value : 0, 0, 0 {R/O}
DB(6) Value : 0, 0, 0 {R/O}
DB(7) Value : 0, 0, 0 {R/O}
DB(8) Value : 0, 0, 0 {R/O}
DB(9) Value : 0, 0, 0 {R/O}
DB(10) Value : 0, 0, 0 {R/O}
DB(11) Value : 0, 0, 0 {R/O}
DB(12) Value : 0, 0, 0 {R/O}
DB(13) Value : 0, 0, 0 {R/O}
DB(14) Value : 0, 0, 0 {R/O}
P_CRCA : 0, 0, 0 {R/O}
P1 : 0, 0, 0 {R/O}
BSY : 0, 0, 0 {R/O}
SEL : 0, 0, 0 {R/O}
RST : 0, 0, 0 {R/O}
REQ : 0, 0, 0 {R/O}
ACK : 0, 0, 0 {R/O}
ATN : 0, 0, 0 {R/O}
C/D : 0, 0, 0 {R/O}
I/O : 0, 0, 0 {R/O}
MSG : 0, 0, 0 {R/O}
Transfer period factor : 0, 0, 0 {R/O}
REQ/ACK offset timing : 0, 0, 0 {R/O}
Transfer width exponent : 1, 1, 1 {R/O}
Protocol options bits : 00h, 09h, 00h
Driver asymmetry : 0, 0, 0 {R/O}
Sent PCOMP enabled : 0, 0, 0 {R/O}
Received PCOMP enabled : 1, 1, 1 {R/O}
Min xfr period factor : 0, 0, 0 {R/O}
Max REQ/ACK offset : 0, 0, 0 {R/O}
Max transfer width exponent : 1, 1, 1 {R/O}
Protocol options bits supported : 08h, 08h, 08h