User manual
Using S.M.A.R.T. Disk Monitor 87
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
Track skew factor : 230, 230, 230 {R/O}
Cylinder skew factor : 170, 170, 170 {R/O}
Supports soft sectoring (SSEC) : 0, 0, 0 {R/O}
Supports hard sectoring (SHEC) : 1, 1, 1 {R/O}
Removable Medium (RMB) : 0, 0, 0 {R/O}
Addresses assigned by surface (SURF) : 0, 0, 0 {R/O}
Rigid Disk Device Geometry : Page [04h] (Factory, Current, Saved)
Number of cylinders : 74340, 74340, 74340 {R/O}
Number of heads : 4, 4, 4 {R/O}
Starting write precomp : 0, 0, 0 {R/O}
Starting reduced current : 0, 0, 0 {R/O}
Drive step rate : 0, 0, 0 {R/O}
Landing Zone Cylinder : 0, 0, 0 {R/O}
RPL : 0, 0, 0 {R/O}
Rotational Offset : 0, 0, 0 {R/O}
Medium rotation Rate : 15015, 15015, 15015 {R/O}
Verify Error Recovery : Page [07h] (Factory, Current, Saved)
EER : 0, 0, 0
PER : 1, 1, 1
DTE : 0, 0, 0
DCR : 0, 0, 0
Verify Retry Count : 11, 11, 11
Verify Correction Span (bits) : 255, 255, 255 {R/O}
Verify Recovery Time Limit (ms) : 65535, 65535, 65535
Cache Control : Page [08h] (Factory, Current, Saved)
Initiator control (IC) : 0, 0, 0
Abort Pre-fetch (ABPF) : 0, 0, 0 {R/O}
Caching analysis permitted (CAP) : 0, 0, 0
Discontinuity (DISC) : 1, 1, 1 {R/O}
Size enable (Size) : 0, 0, 0 {R/O}
Write cache enable (WCE) : 0, 1, 1
Multiplication factor (MF) : 0, 0, 0 {R/O}
Read cache disable (RCD) : 0, 0, 0
Demand read retention priority : 0, 0, 0 {R/O}
Demand Write Retention Priority : 0, 0, 0 {R/O}
Disable Pre-fetch Transfer Length : 65535, 65535, 65535 {R/O}
Minimum Pre-fetch : 0, 0, 0
Maximum Pre-fetch : 65535, 65535, 65535
Maximum Pre-fetch Ceiling : 65535, 65535, 65535 {R/O}
Force sequential write (FSW) : 1, 1, 1 {R/O}
LB cache segment size (LBCSS) : 0, 0, 0 {R/O}
Disable read-ahead (DRA) : 0, 0, 0
Vendor-specific bits (VSS) : 0, 0, 0 {R/O}
Number of cache segments : 32, 32, 32 {R/O}
Cache segment size : 0, 0, 0 {R/O}
Non cache segment size : 0, 0, 0 {R/O}
Control Mode : Page [0Ah] (Factory, Current, Saved)
TST : 0, 0, 0 {R/O}
TMF_ONLY : 0, 0, 0 {R/O}
D_SENSE : 0, 0, 0 {R/O}
GLTSD : 0, 0, 0
RLEC : 1, 1, 1
Queue algorithm modifier : 0, 0, 0
QErr : 0, 0, 0 {R/O}
DQue : 0, 0, 0 {R/O}
VS : 0, 0, 0 {R/O}
RAQ : 0, 0, 0 {R/O}
UA_INTLCK_CTRL : 0, 0, 0 {R/O}
SWP : 0, 0, 0 {R/O}
RAERP : 0, 0, 0 {R/O}
UUAERP : 0, 0, 0 {R/O}
EAERP : 0, 0, 0 {R/O}
ATO : 0, 0, 0 {R/O}
TAS : 0, 0, 0 {R/O}
Autoload mode : 0, 0, 0 {R/O}
Ready AER holdoff period : 0, 0, 0 {R/O}
Busy timeout period : 0, 0, 0 {R/O}