User manual

Using S.M.A.R.T. Disk Monitor 91
SANTOOLS® is registered in US Patent and Trademark Office No 3,107,854 All rights reserved.
Idle : 1, 0, 0
Standby : 1, 0, 0
Idle condition timer : 00000001h, 00000001h, 00000001h
Standby condition timer : 00000004h, 00000004h, 00000004h
Informational Exceptions Control : Page [1Ch] (Factory, Current, Saved)
PERF : 0, 0, 0
EBF : 0, 0, 0 {R/O}
EWASC : 1, 1, 1
DExcpt : 0, 0, 0
TEST : 0, 0, 0
EBACKERR : 0, 0, 0 {R/O}
LogErr : 0, 0, 0
MRIE : 0, 6, 6
Interval timer : 00000000h, 00001770h, 00001770h
Report count : 00000001h, 00000000h, 00000000h
Program Ended.
This disk does not support any of the background media scanning functions as they are not listed under mode
page 1C, where the parameters are specified per the ANSI specification.
1.26.3 Example Mode Page Dump - SCSI Disk
The results below were run under Windows XP using a HP 36 GB SCSI Disk.
C>\scratch>smartmon-ux -J \\.\PHYSICALDRIVE1
SMARTMon-UX [Release 1.36, Build 10-JUN-2008] - Copyright 2001-2008 SANtools(R), Inc. http://www.SANtools.
com
Discovered HP 36.4G MAU3036NC S/N "KY010344" on \\.\PHYSICALDRIVE1 (Not Enabling SMART) [Bus/Port/ID.
LUN=0/2/9.0](34732 MB)
Read-Write Error Recovery : Page [01h] (Factory, Current, Saved)
Automatic reallocation of write (AWRE) : 1, 1, 1
Automatic reallocation of read (ARRE) : 1, 1, 1
Transfer block (TB) : 0, 0, 0
Read continuous (RC) : 0, 0, 0
Enable early recovery (EER) : 0, 0, 0
Post error (PER) : 0, 0, 0
Disable transfer on error (DTE) : 0, 0, 0
Disable correction (DCR) : 0, 0, 0
Read Retry Count : 63, 63, 63
Correction Span : 255, 255, 255 {R/O}
Head Offset Count : 0, 0, 0 {R/O}
Data Strobe Offset Count : 0, 0, 0 {R/O}
Write Retry Count : 63, 63, 63
Recovery Time Limit : 30000, 30000, 30000
Disconnect-Reconnect : Page [02h] (Factory, Current, Saved)
Buffer full ratio : 0, 0, 0
Buffer empty ratio : 0, 0, 0
Bus inactivity limit : 1, 1, 1 {R/O}
Disconnect time limit : 0, 0, 0 {R/O}
Connect time limit : 0, 0, 0 {R/O}
Maximum burst size : 0, 0, 0 {R/O}
Enable modify data pointers (EMDP) : 0, 0, 0 {R/O}
Fair arbitration : 7, 7, 7
Disconnect immediate (DImm) : 0, 0, 0 {R/O}
Data transfer disconnect control (DTDC) : 0, 0, 0 {R/O}
First burst size : 0, 0, 0 {R/O}
Format Device : Page [03h] (Factory, Current, Saved)
Tracks per zone : 54, 54, 54 {R/O}
Alternate sectors per zone : 200, 200, 200
Alternate tracks per zone : 0, 0, 0 {R/O}
Alternate tracks per lun : 36, 36, 36 {R/O}
Sectors per track : 863, 863, 863 {R/O}
Bytes per sector : 512, 512, 512
Interleave : 1, 1, 1 {R/O}
Track skew factor : 216, 216, 216 {R/O}
216