User manual

ManualsBrandsSeagate ManualsAutomobile AccessoriesST3655N

100

SANtools® S.M.A.R.T. Disk Monitor (SMARTMon-UX)92

Cylinder skew factor : 111, 111, 111 {R/O}

Supports soft sectoring (SSEC) : 0, 0, 0 {R/O}

Supports hard sectoring (SHEC) : 1, 1, 1 {R/O}

Removable Medium (RMB) : 0, 0, 0 {R/O}

Addresses assigned by surface (SURF) : 0, 0, 0 {R/O}

Rigid Disk Device Geometry : Page [04h] (Factory, Current, Saved)

Number of cylinders : 49158, 49158, 49158 {R/O}

Number of heads : 2, 2, 2 {R/O}

Starting write precomp : 0, 0, 0 {R/O}

Starting reduced current : 0, 0, 0 {R/O}

Drive step rate : 0, 0, 0 {R/O}

Landing Zone Cylinder : 0, 0, 0 {R/O}

RPL : 0, 0, 0 {R/O}

Rotational Offset : 0, 0, 0 {R/O}

Medium rotation Rate : 15000, 15000, 15000 {R/O}

Verify Error Recovery : Page [07h] (Factory, Current, Saved)

EER : 0, 0, 0

PER : 0, 0, 0

DTE : 0, 0, 0

DCR : 0, 0, 0

Verify Retry Count : 63, 63, 63

Verify Correction Span (bits) : 255, 255, 255 {R/O}

Verify Recovery Time Limit (ms) : 30000, 30000, 30000 {R/O}

Cache Control : Page [08h] (Factory, Current, Saved)

Initiator control (IC) : 0, 0, 0

Abort Pre-fetch (ABPF) : 0, 0, 0 {R/O}

Caching analysis permitted (CAP) : 0, 0, 0 {R/O}

Discontinuity (DISC) : 1, 1, 1 {R/O}

Size enable (Size) : 0, 0, 0 {R/O}

Write cache enable (WCE) : 1, 0, 0

Multiplication factor (MF) : 0, 0, 0 {R/O}

Read cache disable (RCD) : 0, 0, 0

Demand read retention priority : 0, 0, 0 {R/O}

Demand Write Retention Priority : 0, 0, 0 {R/O}

Disable Pre-fetch Transfer Length : 65535, 65535, 65535 {R/O}

Minimum Pre-fetch : 0, 0, 0 {R/O}

Maximum Pre-fetch : 0, 0, 0 {R/O}

Maximum Pre-fetch Ceiling : 65535, 65535, 65535 {R/O}

Force sequential write (FSW) : 1, 1, 1 {R/O}

LB cache segment size (LBCSS) : 0, 0, 0 {R/O}

Disable read-ahead (DRA) : 0, 0, 0 {R/O}

Vendor-specific bits (VSS) : 0, 0, 0 {R/O}

Number of cache segments : 8, 8, 8 {R/O}

Cache segment size : 0, 0, 0 {R/O}

Non cache segment size : 0, 0, 0 {R/O}

Peripheral Device Parameters : Page [09h] (Factory, Current, Saved)

Interface identifier : 0, 0, 0 {R/O}

Reselection retry count : 4, 4, 4 {R/O}

Force FAST-20 : 0, 0, 0

Force FAST-10 : 0, 0, 0 {R/O}

Force 8-BIT : 0, 0, 0 {R/O}

Control Mode : Page [0Ah] (Factory, Current, Saved)

TST : 0, 0, 0 {R/O}

TMF_ONLY : 0, 0, 0 {R/O}

D_SENSE : 0, 0, 0

GLTSD : 0, 0, 0

RLEC : 0, 0, 0

Queue algorithm modifier : 1, 1, 1

QErr : 0, 0, 0

DQue : 0, 0, 0

VS : 0, 0, 0 {R/O}

RAQ : 0, 0, 0 {R/O}

UA_INTLCK_CTRL : 0, 0, 0 {R/O}

SWP : 0, 0, 0 {R/O}

RAERP : 0, 0, 0 {R/O}

UUAERP : 0, 0, 0 {R/O}