SATA Product Manual Standard models ST8000DM004 ST6000DM003 ST4000DM004 ST3000DM007 ST2000DM005 100805918, Rev.
Document Revision History Revision Date Rev. A 08/05/2016 Initial release. 09/07/2016 fc, 6-8, 11-13, 16-18 & 29-30: Added 5TB model, specs & references 9 & 12: Updated Avg seek times to 15.0 ms 13: DC power - Standby/Sleep edits) 18: Added Korean text for Class B device warning Rev.
Contents Seagate® Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.1 About the SATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 2.12 2.13 2.14 Agency and Safety Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2.12.1 Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2.12.2 European Union (EU) CE Marking Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2.12.3 Australian RCM Compliance Mark . .
Figures Figure 1 Figure 2 Figure 3 Figure 4 Location of the HDA temperature check point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching SATA cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting dimensions (1 and 2-disk models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seagate® Technology Support Services For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/recover/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate BarraCuda Product Manual, Rev.
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate® BarraCuda® model drives: ST8000DM004 ST6000DM003 ST4000DM004 ST3000DM007 ST2000DM005 These drives provide the following key features: • Compliant with RoHS requirements in China and Europe. • High instantaneous (burst) data-transfer rates (up to 600MB per second). • Native Command Queuing with command ordering to increase performance in demanding applications. • Quiet operation.
www.seagate.com Drive Specifications 2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST8000DM004 2.1 ST6000DM003 ST4000DM004 ST3000DM007 ST2000DM005 Specification summary tables The specifications listed in Table 1 are for quick reference.
Table 1 Drive specifications summary for 8TB & 6TB model (continued) Drive Specification* ST8000DM004 ST6000DM003 30°C max (operating) 40°C max (non-operating) Wet bulb temperature (max) Altitude, operating –304m to 3048m (–1000 ft to 10,000 ft) Altitude, non-operating (below mean sea level, max) –304m to12,192m (–1000 ft to 40,000+ ft) Operational shock (max) 80 Gs (read) / 70 Gs (write) at 2ms Non-operational shock (max) 300 Gs at 2ms 10Hz to 22Hz: 0.
www.seagate.
www.seagate.com Table 2 Drive Specifications Drive specifications summary for 4TB, 3TB & 2TB model (continued) Drive Specification* ST4000DM004 ST3000DM007 ST2000DM005 5Hz to 22Hz: 3.0 Gs 22Hz to 350Hz: 3.0 Gs 350Hz to 500Hz: 3.0 Gs Vibration, non-operating Drive acoustics, sound power Idle*** 2.2 bels (typical) 2.4 bels (max) 2.0 bels (typical) 2.1 bels (max) Seek 2.4 bels (typical) 2.7 bels (max) 2.2 bels (typical) 2.
www.seagate.com 2.2 Drive Specifications Formatted capacity Model Formatted capacity* Guaranteed sectors 8TB 8000GB 15,628,053,168 6TB 6000GB 11,721,045,168 4TB 4000GB 7,814,037,168 3TB 3000GB 5,860,533,168 2TB 2000GB 3,907,029,168 Bytes per sector 4096 *One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.
www.seagate.com 2.5 Drive Specifications Physical characteristics Maximum height 8TB & 6TB 4TB, 3TB & 2TB 26.1mm / 1.028 in 20.20mm / 0.795 in Maximum width 101.6mm / 4.0 in (± 0.010 in) Maximum length 146.99mm / 5.787 in Typical weight 8TB 630g / 1.389 lb 6TB 610g / 1.345 lb 4TB & 3TB 2TB Cache buffer 2.6 490g / 1.08 lb 415g / 0.915 lb 256MB Start/stop times The start/stop times are listed below.
www.seagate.com 2.7 Drive Specifications Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. Refer to Figure 2 on page 23. 2.7.1 Power consumption Power requirements for the drives are listed in Table 3 and Table 4. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. These power measurements are done with DIPM enabled.
www.seagate.com Drive Specifications 2.7.3 Voltage tolerance Voltage tolerance (including noise): • 5V ±5% • 12V ±10% 2.7.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, users can control power management through the system setup program.
www.seagate.com 2.8 Drive Specifications Environmental specifications This section provides the temperature, humidity, shock, and vibration specifications for BarraCuda drives. Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Above 1000ft. (305 meters), the maximum temperature is derated linearly by 1°C every 1000 ft. Refer to Section 3.4 on page 24 for base plate measurement location. 2.8.
www.seagate.com Drive Specifications 2.8.5 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.8.5.1 Operating shock These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 80 Gs (read) / 70 Gs (write) based on half-sine shock pulses of 2ms during read operations.
www.seagate.com 2.9 Drive Specifications Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. Note For seek mode tests, the drive is placed in seek mode only.
www.seagate.com 2.11 Drive Specifications Warranty To determine the warranty for a specific drive, use a web browser to access the following web page: http://www.seagate.com/support/warranty-and-replacements/ From this page, click on “Is my Drive under Warranty”. Users will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for the drive. 2.11.
www.seagate.com Drive Specifications 2.12.3 Australian RCM Compliance Mark If these models have the RCM marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR32 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication and Media Authority (ACMA). 2.12.4 Canada ICES-003 If this model has the ICES-003:2016 marking it complies with requirements of ICES tested per ANSI C63.4-2014. 2.12.
2.12.8 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.
www.seagate.com Drive Specifications 2.13.2 China Requirements —China RoHS 2 20 China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July 1, 2016, titled Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products.
2.13.3 Taiwan Requirements — Taiwan RoHS Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) requirements in standard CNS 15663, Guidance to reduction of the restricted chemical substances in electrical and electronic equipment. Seagate products must comply with the “Marking of presence” requirements in Section 5 of CNS 15663, effective January 1, 2018. This product is Taiwan RoHS compliant. The following table meets the Section 5 “Marking of presence” requirements..
www.seagate.com Configuring and Mounting the Drive 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic discharge (ESD) hazards.
www.seagate.com 3.4 Configuring and Mounting the Drive Drive mounting Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer to Figure 3 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws.
www.seagate.com Configuring and Mounting the Drive Figure 4 Mounting dimensions (3 and 4-disk models) 3X 6-32 UNC-2B 3 MINIMUM THREAD DEPTH 0.14 MAXIMUM FASTENER PENETRATION BOTH SIDES 4X 6-32 UNC-2B 3 MINIMUM THREAD DEPTH 0.14 MAXIMUM FASTENER PENETRATION Seagate BarraCuda Product Manual, Rev.
www.seagate.com SATA Interface 4.0 SATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA modes 0 to 6. For detailed information about the SATA interface, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. 4.
www.seagate.com 4.3 SATA Interface Supported ATA commands The following table lists SATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA International Organization: Serial ATA Revision 3.0 (http://www.sata-io.org). See “S.M.A.R.T. commands” on page 35 for details and subcommands used in the S.M.A.R.T. implementation.
www.seagate.com Table 10 SATA standard commands (continued) Command name SATA Interface Command code (in hex) Seek 70H Set Features EFH Set Max Address F9H Note: Individual Set Max Address commands are identified by the value placed in the Set Max Features register as defined to the right. Address: Password: Lock: Unlock: Freeze Lock: Set Max Address Extended 37H Set Multiple Mode C6H Sleep E6H S.M.A.R.T. Disable Operations B0H / D9H S.M.A.R.T. Enable/Disable Autosave B0H / D2H S.M.A.R.
www.seagate.com SATA Interface 4.3.1 Identify Device command The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in “Supported ATA commands” on page 27. All reserved bits or words should be set to zero. Parameters listed with an “x” are drive-specific or vary with the state of the drive.
www.seagate.com SATA Interface Table 11 Identify Device commands (continued) Word Description Value Capabilities: (see 7.17.7.
www.seagate.
www.seagate.com SATA Interface Table 11 Identify Device commands (continued) Word Description Value 106 Physical sector size / logical sector size 6003H 107 ATA-reserved 0000H 108-111 The mandatory value of the world wide name (WWN) for the drive. NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support. Each drive will have a unique value.
www.seagate.com SATA Interface Description (if bit is set to 1) Bit Word 63 0 Multiword DMA mode 0 is supported. 1 Multiword DMA mode 1 is supported. 2 Multiword DMA mode 2 is supported. 8 Multiword DMA mode 0 is currently active. 9 Multiword DMA mode 1 is currently active. 10 Multiword DMA mode 2 is currently active. Bit Word 84 0 SMART error login is supported. 1 SMART self-test is supported. 2 Media serial number is supported.
www.seagate.com SATA Interface 4.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled.
www.seagate.com SATA Interface 4.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T.
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 Publication Number: 100805918, Rev.
