User guide

Customizing the Audio Settings

To customize your media player’s audio settings:

1. On the Home screen, press Menu, select Settings, then press OK.

2. Press Menu, select Audio Setup, then press OK.

Use the left and right arrows on the remote to scroll through the Settings screens until

you find the Video screen.

3. Adjust the settings as required, following the information in “Ensuring Softer Sound at

Night” on page 56 and “Adjusting the Digital Output Settings” on page 57.

Ensuring Softer Sound at Night

• When Night Mode is enabled, the intensity of bass sounds are automatically

lowered so that others are not disturbed when you use the media player.

• When Comfort mode is enabled, high and low volume levels of all media and TV

channels are automatically moderated so that the volume becomes neither too

loud nor too soft when you change from one media format to another.

To ensure that sound is softer and controlled at night:

1. On the Audio screen, select Night Mode, then press OK.

2. Select On to turn on Night Mode, or Comfort to turn on Comfort mode, then press

OK.

Composite Connector Component/HDMI

Connector

480i (NTSC)

576i (PAL)

480i 480p (NTSC)

576i 576p (PAL)

720i 720p

1080i 1080p

Note: NTSC (480p, 60 Hz)—Standard North American television resolution

PAL (576p, 50 Hz)—Standard European television resolution

Adjusting the Digital Output Settings

To adjust the digital output settings to meet the needs of your audio equipment:

1. On the Audio screen, select Digital Output, then press OK.

2. Select the setting you want:

• S/PDIF LPCM—Converts multi-channel audio into stereo.

• S/PDIF RAW—Plays digital audio without decoding.

• HDMI LPCM 2CH—Converts multiple audio channels into only a left and a right

channel.