Seagate® BarraCuda™ 120 SSD Product Manual 250 GB 500 GB 1000 GB 2000 GB ZA250CM10003 ZA500CM10003 ZA1000CM10003 ZA2000CM10003 100858062, Rev.
Revision History Version and Date Rev A, September 2019 Description of Changes First document release. © 2019, Seagate Technology LLC All rights reserved. Publication number: 100858062, Rev. A, September 2019 Seagate Technology reserves the right to make changes to the product(s) or information disclosed herein at any time without notice. Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries.
Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 8. Safety, Standards, and Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 8.1 Regulatory Model Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 8.2 Reference Documents . . . . . . . . . . . . . . . . . . . . .
Seagate Technology Support Services For Internal SSD Support, visit: https://www.seagate.com/support/products/ For Firmware Download and Tools Download for Secure Erase, visit: https://www.seagate.com/support/downloads/ For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.
www.seagate.com Introduction 1. Introduction The Seagate® BarraCuda™ 120 SSD is a fast, dependable storage solution for everyday compute applications. The Seagate BarraCuda 120 SSD offers SATA interface, fully compatible with SATA 3.2 6.0Gbps. Table 1 The BarraCuda 120 SSD Features Feature Description Capacity (User) 250 GB, 500 GB, 1000 GB, 2000 GB Certifications, Eco-Compliance CE, UL, FCC, BSMI, KCC, Microsoft WHQL, VCCI, CB RoHS Dimensions (69.85±0.25) x (100±0.25) x (Max.
www.seagate.com Introduction Table 1 The BarraCuda 120 SSD Features (continued) Feature Shock and Vibration Description Shock Non-Operating: 1,500 G, at 0.5 ms Vibration Non-Operating: 1.52 GRMS, (20 to 80 Hz, Frequency) Temperature Range (Operating) 0°C to 70°C Temperature Sensor (SMART Attribute ID C2h) Voltage 5V±5% Warranty Weight See Section 2.4, Environmental Conditions. Five years, or when the device reaches Host TBW, whichever happens first.
www.seagate.com Specifications 2. Specifications 2.1 Models and Capacity Table 2 Models and Capacity Model Names User Capacity ZA250CM10003 250 GB ZA500CM10003 500 GB ZA1000CM10003 1000 GB ZA2000CM10003 2000 GB NOTE 2.2 About capacity: Sector Size: 512 Bytes User-addressable LBA count = ((97696368) + (1953504 x (Desired Capacity in Gb-50.0)) From International Disk Drive Equipment and Materials Association (IDEMA) (LBA1-03_standard.
www.seagate.com 2.3 Specifications Power Consumption Table 4 Power Consumption 250 GB 500 GB 1000 GB 2000 GB Read (mW) 2250 2250 2450 2600 Write (mW) 2450 2450 2650 2780 Idle (mW) 115 114 120 128 Slumber (mW) 28.8 28.8 30.6 38.4 DEVSLP (mW) 5 5 5 5 NOTE 2.4 About power consumption: The average value of power consumption is based on 100% conversion efficiency. The measured power voltage is 5 V. Measured under ambient temperature.
www.seagate.com 2.5 Specifications Non-operating Shock. The limits of non-operating shock applies to all conditions of handling and transportation. This includes both isolated SSD and integrated SSDs. Shock may be applied in the X, Y, or Z-axis. Non-Operating Vibration. The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both isolated SSD and integrated SSDs. Vibration may be applied in the X, Y, or Z-axis.
www.seagate.com Mechanical Information 3. Mechanical Information 3.1 Dimensions and Weight Weight: 50 g, 1.76 Oz +/- 5% Height: Maximum, 7 mm+0.10/-0.30 Width: 69.85 mm±0.25 mm Length: 100.10 mm±0.
www.seagate.
www.seagate.com Pin and Signal Descriptions 4. Pin and Signal Descriptions 4.1 Signal Pin Definitions Table 7 Serial ATA Connector Pin Signal Definitions 4.2 Pin Name Definition S1 Ground Ground S2 A+ S3 A- S4 Ground S5 B- S6 B+ S7 Ground NOTE Key and spacing separate the signal and power segments.
www.seagate.com Supported ATA Command List 5. Supported ATA Command List The BarraCuda 120 SSD complies with ATA-8/ACS-3. All mandatory and many optional commands and features are supported. 5.1 ATA Feature Set The following table summarizes the ATA feature set and commands that the BarraCuda 120 SSD supports. Table 9 ATA Feature Set Feature 5.
www.seagate.
www.seagate.com Supported ATA Command List Table 10 ATA Command Description (continued) Op-Code Support Command Description Configure Stream Op-Code Support Command Description EFh 10h 02h Y Set Features: Enable DMA Setup FIS Auto-Activate optimization EFh 10h 03h Y Set Features: Enable Device-initiated interface power state (DIPM) transitions.
www.seagate.
www.seagate.com SMART Support 6. SMART Support The BarraCuda 120 SSD supports the SMART command set. 6.1 SMART ID The following table lists SMART IDs and Descriptions.
www.seagate.
www.seagate.com Feature Details 7. Feature Details 7.1 Flash Management 7.1.1 Error Correction Code (ECC) Flash memory cells deteriorate with use, which might generate random bit errors in the stored data. The BarraCuda 120 SSD applies the 340 bit/2 KB LDPC (Low Density Parity Check) of ECC algorithm, which detects and corrects errors that occur during read process, ensures data is read correctly, and protects data from corruption. 7.1.
www.seagate.com 7.1.6 Feature Details Over Provisioning Over Provisioning (OP) preserves an additional area beyond user capacity in a SSD, which is not visible to users and cannot be used by them. With Over Provisioning, the performance and IOPS (Input/Output Operations per Second) are improved by providing the controller additional space to manage P/E cycles, which enhances the reliability and endurance as well.
www.seagate.com Feature Details WAF: Write Amplification Factor (WAF) is a numerical value representing the ratio between the amount of data that a SSD controller needs to write and the amount of data that the host’s flash controller writes. A better WAF, which is near 1, guarantees better endurance and lower frequency of data written to flash memory. TBW in this document is based on JEDEC 218/219 workload. 7.2.
www.seagate.com Safety, Standards, and Compliance 8. Safety, Standards, and Compliance Each Hard Drive and Solid State Drive ("device") has a product label that includes certifications that apply to that specific drive. The following information provides an overview of requirements that may apply to the drive. NOTE The most up to date information on Safety, Standards, and Compliance for this product is available in the Seagate HDD and SSD Regulatory Compliance and Safety document.
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology (Netherlands) B.V. Koolhovenlaan 1, 1119 NB Schiphol-Rijk, Netherlands, 31-20-316-7300 Publication Number: 100858062, Rev.
