User Manual SkyRaider 35-60cc Gray 2.20m Seagull - SEA348G Landing Gear

86’’ A-1 SKYRAIDER 35-60cc WARBIRD
Instruction Manual.
38
32.
33.
34.
31.
Epoxy.
Move the throttle stick to the closed
position and move the carburetor to
closed.
Use a 3x10mm hex wrench to tighten
the screw that secures the throttle push-
rod wire. Make sure to use threadlock on
the screw so it does not vibrate loose.
COWLING & ENGINE BAFFLE
Please study images below.
1.
36.
Reinstall the servo horn by sliding the
connector over the pushrod wire. Center
the throttle stick and trim and install the
servo horn perpendicular to the servo
center line.
35.