User Manual SkyRaider 35-60cc Gray 2.20m Seagull - SEA348G Landing Gear
45
1.
3.
2.
INSTALLING HORIZONTAL
STABLLIZER
Use Epoxy to glue the Horizontal
Stabilizer to the fuselage.
Epoxy. Epoxy.
Epoxy.
Install the elevator control horn us-
ing the same method as with the aileron
control horns.
Position the elevator control horns on
both side of the elevator.
ELEVATOR PUSHROD HORN
INSTALLATION
read one clevis and M3 lock nut on
to each elevator control rod. read the
horns on until they are ush with the
ends of the control rods.
Assemble the elevator and rudder
pushrods as shown in images below.
1.
Elevator control horn.
2.
4.