User manual ZLIN Z50 (120) SEAGULL JP-5500070

ZLIN 50. Instruction Manual
20
Remove the covering.
INSTALLING THE HORIZONTAL STABILIZER.
Center line.
 1) Using a ruler and a pen, locate the
centerline of the horizontal stabilizer, at the trail-
ing edge, and place a mark. Use a triangle
and extend this mark, from back to front,
across the top of the stabilizer. Also extend
this mark down the back of the trailing edge of
the stabilizer.
 2) Using a modeling knife, carefully re-
move the covering at mounting slot of horizon-
tal stabilizer.
C/A glue.
C/A glue.
M3x2.5mm.
2.
Screw.
2.
M3x2.5mm.
5) Attach the wood washers in place with C/A
glue.
6) To install the gun onto the wing. Use a hobby
knife to cut a slot at the leading edge of the
wing as shown and glue it with C/A glue for
the gun.
3.